This unit is applicable to meat retailing and food services enterprises.
This unit covers the skills and knowledge required to prepare and produce of more complex value added products, such as those employing pastries, dairy products or cooking. It includes preparing ingredients and following recipes. The operation of processing equipment to produce value-added products may also be required.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Employability Skills
The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged, will assist in identifying Employability Skill requirements.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated over time and under typical operating conditions for the enterprise.
Context of and specific resources for assessment
Assessment must occur in the workplace under normal operating conditions or in a simulated environment.
Method of assessment
Recommended methods of assessment are:
verified work log or diary
workplace assignment
workplace referee or third party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
Resource materials available from MINTRAC, telephone 1800 817 462.
Australian Training Products (www.atpl.net.au):
Meat Retailing and Smallgoods Manufacturing Resources (CD version).
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
This describes the essential skills and knowledge required for this unit. Where bold italicised text is used, further information is detailed in the Range Statement.
Describe regulatory requirements regarding use and storage of fruit and vegetables.
Describe shelf life of products, factors affecting shelf life and effects of different ingredients on shelf life.
Describe the range of effects on the product and on consumer health of the use of incorrect and inadequate quantities of ingredients.
Estimate measures to verify calculations.
Explain the permissible use of additives and ingredients in value-added products.
Explain the properties of correct blending.
Explain the purpose and use of processing equipment in the preparation of value-added products.
Explain the use and purpose of stuffings, seasoning and force meat in producing value-added products.
Explain the use and purposes of ingredients in producing value-added products.
Identify quality requirements related to production of value-added products.
Identify sub-standard product and rectify appropriately.
Label value-added products according to workplace and regulatory requirements.
Make adjustments to equipment when necessary according to manufacturer's, workplace and OH&S requirements.
Provide advice to customers on ingredients in value-added products.
Seek advice on new recipes and products from appropriate sources.
State the effect of various ingredients on product shelf life.
State the procedures for cleaning processing equipment.
State workplace, OH&S and hygiene requirements related to producing value-added products.
Use communication skills appropriate to the task.
Use mathematical skills as required for production of value-added products.
Where quantities of required ingredients are not available, identify suitable alternatives from existing stock, where applicable.
Work with team members to develop new value-added products.
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments within the meat industry and situations that may affect performance. This includes any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. Bold italics wording in the Elements and Performance Criteria, and Required Skills and Knowledge, is detailed below.
Value-added products may include:
beef wellington
fillet mignon
goldfield racks with camembert
pastry meat products
tornadoes (eg pork and apple)
veal cordon bleu.
Workplace requirements may include:
enterprise-specific procedures and ethical standards
Standard Operating Procedures
work instructions.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coat and apron
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards, codes of practice etc.
Ingredients vary depending on the products and may include:
brines
fruit
glazes
marinades prepared from a recipe
meat
nuts
pastry - filo, shortcrust, puffed, flaky
satays
sauces
skewers
sprinkles
stuffings prepared from a recipe
vegetables.
Regulatory requirements may include:
Export Control Act
federal and state regulations regarding meat processing and food handling
hygiene and sanitation requirements
relevant Australian Standards.
Descriptions and explanations may:
be presented orally, in writing using standard formats or using a range of communications technology and media
include information from several sources
present information in diagrammatic, tabular, graphic or pictorial formats
require summaries of information for presentation to work colleagues
use workplace, mathematical and technical language.
Communication skills may:
be with people from a range of cultural, social and ethnic backgrounds and with colleagues, superiors, customers, clients and external parties
involve speaking clearly and directly
involve the use of communication technology
relate to own work and the wider work area
require reading and interpreting workplace related documentation.
Mathematical skills relate to own work and work area problem-solving and monitoring, and may:
involve estimation and calculation
involve the use of calculators and computer software packages
involve the use of familiar and unfamiliar complex formula
relate to product formulation and specification
require interpretation and drawing conclusions from a range of simple and complex mathematical tables, charts, bar graphs, pie charts, etc
require monitoring, adjusting and calibrating formula, specifications, outputs and equipment
require synthesis and analysis of mathematical information from more than one source.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Processing equipment is prepared and operated according to hygiene, and health and safety requirements.
Faults are identified in line with manufacturer's and workplace requirements.
Equipment is used according to manufacturer's, workplace and OH&S requirements.
Start-up and shut-down procedures are performed according to manufacturer's and workplace requirements.
Equipment is cleaned to manufacturer's, OH&S, hygiene and workplace requirements.
Recipes are followed to prepare and produce value-added products to product specifications.
Ingredients are selected in accordance with recipes, policy and practice, and regulatory requirements.
Ingredients are weighed in accordance with recipe specifications and regulatory requirements.
Ingredients are labelled according to workplace and regulatory requirements.
Meat is prepared according to recipes, policy and practice.
Stuffings, seasonings and force meat are prepared in accordance with recipes, policy and practice.
Marinades, sauces and glazes are prepared in accordance with recipes, policy and practice.
Ingredients are weighed in accordance with recipe requirements.
Ingredients are added to meat according to recipes, product specifications and regulatory requirements.
Ingredients are blended to achieve product consistency according to recipes and product specifications.
Product is formulated according to product specifications.
Product is presented according to product specifications and policy and procedures.
Pastry types are used correctly to recipes and workplace requirements.
Meat is skewered according to recipes and workplace requirements.
Product is stored according to workplace and regulatory requirements.
Ingredients are stored according to workplace and regulatory requirements.
Shelf life of products is identified and appropriate action taken.
Effects of ingredients on shelf life are identified and appropriate action taken.
Forms
Assessment Cover Sheet
MTMR308B - Prepare and produce value-added products
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MTMR308B - Prepare and produce value-added products
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent