The evidence guide identifies the requirements to be demonstrated to confirm competence for this unit. Assessment must confirm sufficient ability to use appropriate skills and knowledge to organise and monitor cleaning operations. Assessment of performance should be over a period of time covering all categories within the range statement that are applicable in the working environment.

Critical aspects of competency

Understanding the resource implications of the particular cleaning methods being used in the work order.

Assessing the equipment and material requirements of the work order.

Compliance with company and legislative requirements.

Implementing and maintaining an effective stores/inventory system and ordering system.

Outcomes achieved in relation to customer work order and company requirement.

Reviewing effectiveness of current products.

Updating product knowledge.

Knowledge needed to achieve the performance criteria

Knowledge and understanding are essential to apply this unit in the workplace, to transfer the skills to other contexts and to deal with unplanned events. The knowledge requirements for this unit are listed below.

Job specification requirements.

Types of surface types and effective and compatible cleaning methods.

Types of cleaning equipment and their appropriate uses.

Types of chemicals and their appropriate uses.

Stock control procedures and methods.

Purchasing policy and processes.

Quality assurance procedures.

Awareness of applicable legislation, regulations, codes of practice and industry advisory standards.

Communication and negotiation techniques.

Company management structure and reporting procedures.

Company procedures and practices.

Emergency response and evacuation procedures.

Injury, dangerous occurrence and incident reporting.

Knowledge of biological and viral control procedures.

OHS legislation and procedures.

Routes of entry and potential symptoms of exposure from chemicals.

Specific skills needed to achieve the performance criteria

To achieve the performance criteria, some complementary skills are required. These are:

literacy skills to enable reading and comprehension of information and technical data from suppliers and manufacturers and to prepare reports and recommendations on new product developments

performing the mathematical calculations required for preparing cost-benefit analysis, purchasing and controlling stock levels

applying correct manual handling techniques

communicating clearly and concisely using written and verbal modes

customer service

displaying team leadership

handling and disposal of chemicals safely

handling and disposal of contaminated and toxic waste

planning and organising work

problem solving and critical analysis

reading, interpreting and comprehending directions and safety instructions in equipment manuals and MSDS and on chemical labels

requesting advice or further information

scheduling and rostering

seeking and receiving feedback

sourcing, organising and recording information

working as part of a team.

Other units of competency that could be assessed with this unit

Competence in this unit may be assessed in conjunction with PRMCL22B Organise and monitor cleaning operations.

Resources required to assess this unit

The following resources should be available:

access to suitable venue, equipment and relevant requisition guidelines sites

work order and client specifications

Australian Standard 2508 - Safe storage and handling information for hazardous material

access to plain English version of relevant statutes and procedures

work order instructions, work plans and schedules and policy documents

assessment instruments, including personal planner and assessment record book.

Gaining evidence to assess this unit

For valid and reliable assessment of this unit, the competency should be demonstrated over a period of time and be observed by the assessor.

The competency is to be demonstrated in a range of situations that may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace.

Assessment of competency may be made through practical demonstration in the work environment. A further option for off-the-job assessment may be by way of a work-related project(s) supplemented by supervisor reports.

Key competency levels

There are a number of processes that are learnt throughout work and life that are required in all jobs. They are fundamental processes and generally transferable to other work functions. Some of these are covered by the key competencies, although others may be added.

Information below highlights how these processes are applied in this unit of competency.

Refer to Evidence Guide

The range statement links the required knowledge and organisational and technical requirements to the workplace context. It describes any contextual variables that will be used or encountered when applying the competency in work situations. It allows for different work practices and work and knowledge requirements as well as for differences between organisations and workplaces. The following variables are listed in alphabetical order and may be present for this particular unit.

Appropriate person(s) may include:

managers

person(s) in control of work site(s)

supervisors.

Chemicals may include:

acid cleaners

alkaline cleaners

neutral cleaners

solvent cleaners.

Company requirements may include:

access and equity policy, principles and practice

business and performance plans

client communication procedures

client confidentiality procedures

client service standards

communication channels and reporting procedures

company goals, objectives, plans, systems and processes

company issued identification badge/card/pass

company policy and procedures

company service standards

defined resource parameters

dress and presentation requirements

duty of care, code of conduct, code of ethics

emergency response and evacuation procedures

maintenance procedures for equipment and PPE

OHS control procedures (e.g. health and safety plans, job plans, job safety analysis, risk assessments, safe operating practices/procedures, safe work instructions, work method statements, safe system of work statements)

OHS policies and procedures

personnel practices and guidelines

policies and procedures relating to own role, responsibility and delegation

quality and continuous improvement processes and standards

records and information systems and processes

rights and responsibilities of employees and employers

training (induction, refresher and new skills) materials

use of contractors

work site access security clearance procedures.

Consumables may include:

air freshener

hand towel

liner bags

soap

toilet paper.

Effectiveness and efficiency may include:

client satisfaction

cost/benefit

environmental impact

functionality

health and safety issues

productivity.

Equipment may include:

access equipment - various types

bins - various types

brooms - various types

buckets

buffers - various types

cleaning trolley

cloths

cobwebber

doodle bag holder

drop sheets

drying equipment

dust pans and brushes

dusters - various types

extension poles

extraction units, wand and hand tools

hoses

ladders

mops

personal protective equipment

polishers

pressure-washing equipment and attachments

scouring pads

scrapers

scrubbers - various types

site communication devices

sponges

spray bottles

squeegee

steam cleaners

sweepers - various types

vacuum cleaners and attachments - various types

window cleaning equipment.

Functionality may include:

advice from staff or colleagues

company experience with products

industry recommendations and/or standards

material safety data sheets

new product technical data or guides

previous experience with products.

Industry events may include:

product demonstrations

product promotions

safety demonstrations

seminars

supplier training

trade shows.

Industry information may include:

government agencies and departments

industry association materials

industry magazines, newsletters and journals

manufacturers' specifications

supplier promotional materials and technical data.

Legislative requirements may include:

Australian Standards, quality assurance and certification requirements

award and enterprise agreements

codes of practice

national industry standards

relevant Commonwealth/state/territory legislation and local government regulations that affect company operation:

anti-discrimination and diversity

availability of chemical registers/manifests

chemical controls

consumer protection

environmental protection issues

equal employment opportunity

freedom of information

industrial equipment certificates of competency or licences

industrial relations

OHS Acts and regulations

privacy

trade practices

workplace consultative arrangements.

Manufacturers' specifications may include:

equipment operational manuals

instructional guides

MSDS

other resources supplied by the manufacturer (such as laminated cards notices, wall posters)

product labels

safety instructions pre-printed on equipment.

Occupational health and safety* (OHS) requirements may relate to:

allergic reactions (contact dermatitis, etc)

communication devices for remote and isolated locations e.g. mobile phone, two-way radio, etc

dermatoxicological control and prevention measures

emergency procedures for eye and skin contact, inhalation and ingestion of toxic substances

hazard identification and risk assessment mechanisms

hazard reporting

health surveillance and monitoring (including blood testing)

hierarchy of hazard control procedures

injury, dangerous occurrence and incident reporting requirements

keeping access ways clear from obstruction

maintaining clear access ways

maintenance procedures for equipment and PPE

national industry standards/codes of practice

OHS control procedures (e.g. health and safety plans, job plans, job safety analysis, risk assessments, safe operating practices/procedures, safe work instructions, work method statements, safe system of work statements)

protection from hazardous substances, noise and dust

protection of people in the workplace

routes of entry and potential symptoms of exposure from chemicals

safety training (induction and refresher)

ultraviolet light

up-to-date electrical test and tag compliance

use of chemicals in accordance with labels

use, storage and maintenance of equipment in accordance with manufacturers' specifications and equipment operating manuals

use, storage and maintenance of personal protective equipment and clothing.

* Also known as occupational safety and health or workplace health and safety

Personal protective equipment (PPE) may include:

ear muffs/plugs

gloves - non-permeable

goggles

high-visibility vests/clothing

overalls and other protective clothing

respirator

safety glasses

safety shoes

splash-proof face masks

sun protection

tongs

ultraviolet protection

wet-work clothing.

Rights and responsibilities of employees may relate to:

confidentiality and privacy rights

duty of care

knowing the appropriate personnel for reporting purposes

knowing the location of manuals and/or related documents

knowing the terms and conditions of own employment

knowing the workplace procedures

protection from discrimination and sexual harassment.

Rights and responsibilities of employers may relate to:

duty of care

providing a safe environment free from discrimination and sexual harassment (see relevant state and Commonwealth anti-discrimination legislation)

providing a safe workplace in accordance with OHS legislation, codes of practice, regulations and standards

providing information and training in work tasks, OHS and other employment related matters

the right to dismiss you if you (see the Commonwealth Workplace Relations Act 1996):

are negligent, careless or cause an accident

commit a criminal offence

commit acts of disloyalty such as revealing confidential information

use abusive language.

Work order information may include:

access to work site and egress points

budget allocations

completion times/dates

insufficient people to complete the work task(s)

job requirements and tasks

legislative requirements and local government

OHS requirements and emergency response procedures

resource requirements - equipment, chemicals and consumables

specific client requirements e.g. relationships with other activities, dress and presentation requirements

use of signage and barriers

work schedules

working in isolated and remote locations

work site contact person(s).

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist