List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to maintain concrete bridges | 1.1 Access, interpret and apply documentation to maintain concrete bridges and ensure the work activity is compliant 1.2 Obtain, interpret, clarify and confirm work instructions before commencing 1.3 Confirm and apply environmental protection and safety requirements 1.4 Obtain, interpret and implement traffic management signage requirements 1.5 Select and check for faults plant, tools and equipment to carry out tasks 1.6 Identify, address and report environmental issues, potential hazards and risks 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Maintain bridge | 2.1 Follow work order/schedule of repairs and maintenance 2.2 Inspect bridge structure to confirm nature and extent of fault 2.3 Report significant deterioration of existing faults or new faults 2.4 Carry out repairs and maintenance of bridge structure 2.5 Report completed repairs and maintenance, noting and documenting any new faults |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable legislation, documentation, policies and procedures for maintaining concrete bridges
works effectively with others to undertake and complete the maintenance of concrete bridges that meets all of the required outcomes including:
using a range of communication techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
communicating clearly and concisely with others to receive and clarify work instructions
implementing traffic management signage
demonstrates completion of maintaining concrete bridges that safely, effectively and efficiently meets all of the required outcomes including:
completing a minimum of four (4) different maintenance and repair activities on three (3) separate bridges, including at least one (1) deck joint repair, to specifications
identifying and reporting deterioration of existing faults and new faults
The candidate must demonstrate knowledge of maintaining concrete bridges through:
applying legislative, organisation and site requirements for:
risk assessment and management
site and equipment safety requirements
safety procedures for working at heights and over water
site isolation and traffic control responsibilities and authorities
project quality requirements
civil construction terminology
bridge components
bridge faults and repair methods
interpreting engineering drawings
equipment types, characteristics, technical capabilities and limitations
safety data sheets and materials handling methods
JSA/JSEA/safe work method statements
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level