List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to conduct pedestrian road marking operations | 1.1 Access, interpret and apply pedestrian road marking operations documentation and ensure the work activity is compliant 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding 1.3 Identify, and implement traffic management signage requirements 1.4 Select and check for faults plant, vehicles, tools and equipment to carry out tasks 1.5 Identify, address and report hazards, risks and environmental issues 1.6 Select and wear correct personal protective equipment appropriate for work activities 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Select fuel, lubricants | 2.1 Select fuel and lubricants for the required equipment operations |
3. Carry out operator checks and maintenance | 3.1 Check and adjust fuel, oil, hydraulic fluid filters and water levels 3.2 Tighten and maintain bolts, nuts and attachment couplings 3.3 Check function of controls and gauges and adjust where necessary 3.4 Carry out pre-start, start-up, park up, shutdown and secure equipment procedures 3.5 Carry out scheduled maintenance of plant/equipment 3.6 Locate plant and equipment safely when not in immediate use |
4. Use pedestrian road marking plant | 4.1 Configure lines to specification based on a computerised program 4.2 Apply new lines to the new or resurfaced area 4.3 Superimpose new lines over old lines on existing surfaces 4.4 Operate line cut on/cut off device according to the job specification 4.5 Apply road marking material to the surface providing an even coverage |
5. Clean up | 5.1 Clear work area and dispose of or recycle materials 5.2 Return surplus fuel, lubricants, paints and beads to storage 5.3 Clean, check, maintain and store vehicles, tools and equipment 5.4 Carry out housekeeping activities |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable documentation, policies and procedures
implements requirements, procedures and techniques for the safe, effective and efficient completion of pedestrian road marking operations including:
using computerised programs to provide specifications
works effectively with others to undertake and complete pedestrian road marking operations that meets all of the required outcomes including:
using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone
demonstrates completion of conducting pedestrian road marking operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
selecting and inspecting for faults in plant, tools and equipment
identifying, reporting and recording hazards, risks and environmental issues
conducting pre-start, start-up, park up, shut down and secure equipment maintenance procedures
completing placement of a minimum of twenty square metres (20m2) of new marking or remarking of existing markings are to be placed with a walk behind pedestrian road marking machine to the specified tolerance, and
completing placement of a minimum of one hundred (100) lineal metres of new line marking or remarking of existing markings with a pedestrian road marking machine to the specified tolerance, which include any four (4) of the following types;
edge lines
arrows
lane lines (broken and unbroken)
separation lines (broken and unbroken)
barrier lines (one direction and both directions)
continuity lines
turn lines
outline
stop lines
holding lines
give way lines
pedestrian crosswalk lines
diagonal and chevron markings
numerals
parking areas and kerb markings
The candidate must demonstrate knowledge in conducting pedestrian road marking operations through:
applying legislative, organisation and site requirements and procedures for:
work, health and safety
equipment operation
operational, maintenance and basic diagnostics
JSAs/safe work method statements
housekeeping
identifying equipment types, characteristics, technical capabilities and limitations
complying with project quality requirements
identifying and using civil construction terminology
site isolation and traffic control responsibilities and authorities
walk behind pedestrian road marking activities and techniques
interpreting and applying road markings
applying road marking materials
complying with safety data sheets and materials handling methods
applying processes for the calculation of material requirements, application rates and travel speed
being prepared for fire/accident/emergency
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level