List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to conduct airless and atomised spraying operations | 1.1 Access, interpret and apply airless and atomised spraying operations documentation and ensure the work activity is compliant 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding 1.3 Identify and implement traffic management signage requirements 1.4 Select and check for faults plant, tools and equipment to carry out tasks 1.5 Identify, address and report hazards, risks and environmental issues 1.6 Select and wear correct personal protective equipment appropriate for work activities 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Prepare surface and set out | 2.1 Clear area of dirt, debris and other contaminants 2.2 Identify location for line marking and set out with control points 2.3 Spot straight lines and curves in preparation for marking 2.4 Remove pre-existing visible marks/lines |
3. Prepare marking materials | 3.1 Mix and prepare marking material 3.2 Adjust additives and consistency of material to allow easy application and appropriate drying time 3.3 Transfer marking material carefully to applicator container |
4. Apply road marking materials | 4.1 Apply airless and/or atomised spray equipment across the surface with the correct movement and pressure 4.2 Apply road marking material to the surface providing an even coverage 4.3 Identify and correct defects in the coating 4.4 Maintain equipment |
5. Measure work | 5.1 Assess, record and report work outcomes 5.2 Measure, calculate and quantify amount of line marking completed 5.3 Identify and report non-conforming work |
6. Clean up | 6.1 Clear work area and dispose of or recycle materials 6.2 Clean, check, maintain and store tools and equipment 6.3 Carry out housekeeping activities |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies applicable documentation, policies and procedures
works effectively with others to undertake and complete airless and atomized spraying operations that meets all of the required outcomes including:
communicating clearly and concisely with others to receive and clarify work instructions
using a range of communication techniques and systems such as signage to advise others of work activity and exclusion zone
demonstrates completion of conducting airless and atomised spraying operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
selecting and inspecting for faults in plant, tools and equipment
identifying, reporting and recording hazards, risks and environmental issues
removing dirt, debris and contaminants from the area
setting out the location for line marking with control points
spotting straight lines and curves, and removing pre-existing lines that are visible
preparing the marking materials by mixing, adjusting and drying appropriately
completing the application of at least thirty square metres (30m2) of transverse lines within tolerances specified using airless or atomised spray equipment
measuring, calculating and quantifying amount of completed line marking
clearing work area and storing equipment appropriately
The candidate must demonstrate knowledge in conducting airless and atomised spraying operations through:
applying organisation and site requirements and procedures for:
work, health and safety
equipment operation
operational, maintenance and basic diagnostics
JSAs/safe work method statements
housekeeping
identifying road markings
identifying equipment types, characteristics, technical capabilities and limitations
complying with project quality requirements
identifying and using civil construction terminology
site isolation and traffic control responsibilities and authorities
applying road marking materials
complying with safety data sheets and materials handling methods
applying processes for the calculation of material requirements, application rates and movement speed
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level