List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to conduct field work | 1.1. Access, interpret and apply compliance documentation and ensure the work activity is compliant 1.2. Obtain, read, interpret, clarify and confirm work requirements 1.3. Identify and address potential risks, hazards and environmental issues, and implement control measures 1.4. Select and wear personal protective equipment appropriate for work activities 1.5. Carry out surveys using relevant survey equipment 1.6. Conduct reconnaissance survey of the field 1.7. Locate reference pegs where available |
2. Design, plot and lay out a grid | 2.1. Design a grid from supplied information 2.2. Plot grid to scale 2.3. Mark baseline and grid datum mark-up pegs with eastings and northings 2.4. Lay out grid using plotting techniques |
3. Read and use maps | 3.1. Identify the sources of maps 3.2. Identify the types and features of maps used for mineral exploration fieldwork 3.3. Maintain map storage system 3.4. Calculate scales and distances between points 3.5. Calculate bearings relative to true, magnetic, grid and local north |
4. Locate mining tenement marks | 4.1. Refer to state and federal agencies for information relevant to mining tenements to determine the types of mining tenements and their purpose 4.2. Draw scale maps of mining tenement to statutory regulations 4.3. Obtain and complete forms required to obtain mining tenements to statutory requirements for lodging, and lodge with relevant agencies/authorities 4.4. Mark out, or locate and maintain mining tenement marks to statutory requirements, using Global Positioning System (GPS) |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of the conduct field work including:
identifying and using surveying instruments
using field testing and measurement instruments/equipment
identifying and applying plotting techniques
demonstrates completion of conducting field work that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
conducting surveys
designing and plotting grids
calculating scales and distances between points
completing mining tenement forms
marking out, locating and maintaining mining tenement marks
The candidate must demonstrate knowledge of conducting field work through:
data collection and analysis methods
field surveying methods
types and features of maps
reading of maps
calculation of scales, distances and bearings
laying out of grids
plotting techniques
mining tenement legislation and requirements
Global Positioning Systems (GPS)
types of GPS and DGPS/operation of GPS and functions
satellite coverage
waypoint generation
datum conversion
AMG and latitude/longitude
track logging
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level