List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:
apply spontaneous combustion management measures on at least two occasions, including:
applying mine atmosphere monitoring systems, including:
portable (hand held) monitoring
status monitoring, including:
physical indications of spontaneous combustion
gaseous indications of spontaneous combustion
changes in ventilation conditions
defective seals
applying control measures to eliminate or minimise spontaneous combustion risks, including:
grouting
digging-out
water infusion.
During the above, the candidate must:
locate and apply relevant legislation, documentation, policies and procedures and confirm work activity is compliant
implement the requirements, procedures and techniques for spontaneous combustion management measures, including:
accessing, interpreting and applying general information on spontaneous combustion
recognising and reporting incidents and potential hazards associated with spontaneous combustion
identifying mine ventilation structures
work effectively with others to plan, prepare and conduct the application of spontaneous combustion management measures including:
organising work activities to meet task requirements
communicating clearly and concisely with others to receive and clarify work instructions
complying with reporting requirements and procedures.
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:
key legislation required to apply spontaneous combustion management measures
key policies, procedures and documentation required to apply spontaneous combustion management measures, those relating to:
work health and safety
environmental issues
hazard and risk management
mine operational activities
housekeeping
principles and techniques for identifying and managing mine gases, including:
methane
carbon dioxide
hydrogen sulphide
normal atmospheric gases
carbon monoxide
spontaneous combustion causes and hazards, including:
coal stowage hazards, including:
spillage coal
waste products
physical spontaneous combustion indicators, including:
smoke
haze
sweating
smell
heat
principles and techniques for applying spontaneous combustion management plan requirements, including procedures for:
mine atmosphere monitoring
reporting requirements
ventilation systems and usage
mine plan
action plan
response plans
emergency procedures
individual group responsibilities
mine ventilation structures, including:
stoppings
overcasts
regulators
preparation seals
fire doors
bulk heads
goaf seals
final seals
pressure chambers
techniques for interpreting and applying geological data
principles and techniques for applying gas monitoring systems
principles and techniques for applying spontaneous combustion reporting measures
principles and techniques for applying mine atmosphere monitoring systems, including:
portable (hand held) monitoring
collection of bag samples
status monitoring, including:
physical indications of spontaneous combustion
gaseous indications of spontaneous combustion
changes in ventilation conditions
defective seals
damage to monitoring systems/equipment
principles and techniques for applying control measures for eliminating or minimising spontaneous combustion risks, including:
grouting
digging-out
sealing
water infusion
inertisation
key characteristics, capabilities and limitations of equipment required for spontaneous combustion management
principles and techniques for addressing, reporting and responding to relevant hazards and emergencies
site requirements for completing maintenance records and reports, including reporting ventilation status
basic techniques for communicating job activities with others.
Mandatory conditions for assessment of this unit are stipulated below. The assessment must:
include access to:
personal protective equipment
equipment required to apply spontaneous combustion management measures
be conducted in a safe environment; and,
be assessed in the context of this sector's work environment; and,
be assessed in compliance with relevant legislation/regulation and using policies, procedures and processes directly related to the industry sector for which it is being assessed; and,
confirm consistent performance can be applied in a range of relevant workplace circumstances.
Where personal safety or environmental damage are limiting factors, assessment may occur in a simulated work environment* provided it is realistic and sufficiently rigorous to cover all aspects of this sector’s workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessor requirements
Assessors must be able to clearly demonstrate current and relevant industry knowledge and experience to satisfy the mandatory regulatory standards as set out in the Standards for Registered Training Organisations (RTOs) 2015/Australian Quality Training Framework mandatory requirements for assessors current at the time of assessment and any relevant licensing and certification requirements. This includes:
vocational competencies at least to the level being delivered and assessed
current industry skills directly relevant to the training and assessment being provided
current knowledge and skills in vocational training and learning that informs their training and assessment
formal relevant qualifications in training and assessment
having knowledge of and/or experience using the latest techniques and processes
possessing the required level of RII training product knowledge
having an understanding and knowledge of legislation and regulations relevant to the industry and to employment and workplaces
demonstrating the performance evidence, and knowledge evidence outlined in this unit of competency, and
the minimum years of current** work experience after competency has been obtained as specified below in an industry sector relevant to the outcomes of the unit.
It is also acceptable for the appropriately qualified assessor to work with an industry expert to conduct assessment together and for the industry expert to be involved in the assessment judgement. The industry expert must have current industry skills directly relevant to the training and assessment being provided. This means the industry subject matter expert must demonstrate skills and knowledge from the minimum years of current work experience after competency has been obtained as specified below, including time spent in roles related to the unit being assessed:
Industry sector | AQF indicator level*** | Required assessor or industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Infrastructure | 1 | 1 year |
2 | 2 years |
Drilling, Coal Mining, Extractive (Quarrying), Metalliferous Mining and Civil Infrastructure | 3-6 | 3 years |
Other sectors | Where this unit is being assessed outside of the resources and infrastructure sectors assessor and/or industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no industry standard is specified should comply with any relevant regulation. |
*Guidance on simulated environments has been stipulated in the Companion Volume Implementation Guide located on VETNet.
**Assessors can demonstrate current work experience through employment within industry in a role relevant to the outcomes of the unit; or, for external assessors this can be demonstrated through exposure to industry by conducting a minimum number of site assessments as determined by the relevant industry sector, across various locations.
*** While a unit of competency does not have an AQF level, where a unit is being delivered outside of a qualification the first numeric character in the unit code should be considered as the AQF indicator level for assessment purposes.