This unit describes a participant’s skills and knowledge required to conduct guided boring in Drilling.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of this unit
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for guided boring
1.1 Access, interpret and apply guided boring documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select and wear personal protective equipment appropriate for work activities
1.5 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
1.6 Communicate and coordinate activities with others throughout the work activity
2. Bore pilot hole
2.1 Carry out pre-start and start up procedures
2.2 Identify, select and apply rig operational controls
2.3 Fit locating device to drill head and attach drill head to drill stem
2.4 Align drilling head with survey tool and survey control system
2.5 Drill pilot hole according to design alignment
2.6 Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
2.7 Add drill stem sections as required
2.8 Steer, and where required, zone steer drill head to achieve required pitch and direction
2.9 Monitor and interpret all gauge/dial readings
2.10 Monitor and interpret drill fluid return and drill spoil
2.11 Monitor and interpret drill head position and pitch
2.12 Maintain communication with all relevant personnel
2.13 Maintain drill log and reports as required
3. Complete back reaming, and product pull back
3.1 Lock out machine
3.2 Remove drill head
3.3 Check free rotation of swivel
3.4 Connect appropriate back reamer, swivel and product
3.5 Locate product feed to prevent damage and within breakover limitations
3.6 Check all safety precautions are in place and restart machine
3.7 Back reaming/pre-ream, and install product, removing drill stem sections
3.8 Monitor and interpret all gauge/dial readings
3.9 Monitor and interpret drill fluid flow from both ends of hole
3.10 Monitor product feed
3.11 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
3.12 Take required actions to achieve satisfactory product installation as required
3.13 Maintain drill log and reports as required
4. Respond to problems
4.1 Identify possible problems in equipment or process
4.2 Determine problems needing action
4.3 Determine possible fault causes
4.4 Rectify problem using appropriate solution within area of responsibility
4.5 Follow through items initiated until final resolution has occurred
4.6 Report problems outside area of responsibility to designated person
5. Complete equipment maintenance and housekeeping
5.1 Carry out shutdown and secure equipment
5.2 Monitor wear on drill stem, particularly threads
5.3 Dress damaged threads or replace drill stem as required
5.4 Check all equipment and hoses
5.5 Monitor wear on drill heads and reamers and take required action
5.6 Clean all equipment upon completion of bore, ensuring environmental controls are followed
5.7 Rotate drill stems in stack
5.8 Ensure drill fluid is appropriately contained/disposed of
5.9 Ensure maintenance schedules are followed
5.10 Ensure housekeeping activities are completed
5.11 Process records
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
1. Plan and prepare for guided boring
1.1 Access, interpret and apply guided boring documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select and wear personal protective equipment appropriate for work activities
1.5 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
1.6 Communicate and coordinate activities with others throughout the work activity
2. Bore pilot hole
2.1 Carry out pre-start and start up procedures
2.2 Identify, select and apply rig operational controls
2.3 Fit locating device to drill head and attach drill head to drill stem
2.4 Align drilling head with survey tool and survey control system
2.5 Drill pilot hole according to design alignment
2.6 Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
2.7 Add drill stem sections as required
2.8 Steer, and where required, zone steer drill head to achieve required pitch and direction
2.9 Monitor and interpret all gauge/dial readings
2.10 Monitor and interpret drill fluid return and drill spoil
2.11 Monitor and interpret drill head position and pitch
2.12 Maintain communication with all relevant personnel
2.13 Maintain drill log and reports as required
3. Complete back reaming, and product pull back
3.1 Lock out machine
3.2 Remove drill head
3.3 Check free rotation of swivel
3.4 Connect appropriate back reamer, swivel and product
3.5 Locate product feed to prevent damage and within breakover limitations
3.6 Check all safety precautions are in place and restart machine
3.7 Back reaming/pre-ream, and install product, removing drill stem sections
3.8 Monitor and interpret all gauge/dial readings
3.9 Monitor and interpret drill fluid flow from both ends of hole
3.10 Monitor product feed
3.11 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
3.12 Take required actions to achieve satisfactory product installation as required
3.13 Maintain drill log and reports as required
4. Respond to problems
4.1 Identify possible problems in equipment or process
4.2 Determine problems needing action
4.3 Determine possible fault causes
4.4 Rectify problem using appropriate solution within area of responsibility
4.5 Follow through items initiated until final resolution has occurred
4.6 Report problems outside area of responsibility to designated person
5. Complete equipment maintenance and housekeeping
5.1 Carry out shutdown and secure equipment
5.2 Monitor wear on drill stem, particularly threads
5.3 Dress damaged threads or replace drill stem as required
5.4 Check all equipment and hoses
5.5 Monitor wear on drill heads and reamers and take required action
5.6 Clean all equipment upon completion of bore, ensuring environmental controls are followed
5.7 Rotate drill stems in stack
5.8 Ensure drill fluid is appropriately contained/disposed of
5.9 Ensure maintenance schedules are followed
5.10 Ensure housekeeping activities are completed
5.11 Process records
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Access, interpret and apply guided boring documentation and ensure the work activity is compliant
Obtain, read, interpret, clarify and confirm work requirements
Identify and address potential risks, hazards and environmental issues and implement control measures
Select and wear personal protective equipment appropriate for work activities
Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
Communicate and coordinate activities with others throughout the work activity
Carry out pre-start and start up procedures
Identify, select and apply rig operational controls
Fit locating device to drill head and attach drill head to drill stem
Align drilling head with survey tool and survey control system
Drill pilot hole according to design alignment
Monitor drill path ensuring pilot hole meets conformance envelope and dogleg severity is within limits
Add drill stem sections as required
Steer, and where required, zone steer drill head to achieve required pitch and direction
Monitor and interpret all gauge/dial readings
Monitor and interpret drill fluid return and drill spoil
Monitor and interpret drill head position and pitch
Maintain communication with all relevant personnel
Maintain drill log and reports as required
Lock out machine
Remove drill head
Check free rotation of swivel
Connect appropriate back reamer, swivel and product
Locate product feed to prevent damage and within breakover limitations
Check all safety precautions are in place and restart machine
Back reaming/pre-ream, and install product, removing drill stem sections
Monitor and interpret all gauge/dial readings
Monitor and interpret drill fluid flow from both ends of hole
Monitor product feed
Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
Take required actions to achieve satisfactory product installation as required
Maintain drill log and reports as required
Identify possible problems in equipment or process
Determine problems needing action
Determine possible fault causes
Rectify problem using appropriate solution within area of responsibility
Follow through items initiated until final resolution has occurred
Report problems outside area of responsibility to designated person
Carry out shutdown and secure equipment
Monitor wear on drill stem, particularly threads
Dress damaged threads or replace drill stem as required
Check all equipment and hoses
Monitor wear on drill heads and reamers and take required action
Clean all equipment upon completion of bore, ensuring environmental controls are followed
Rotate drill stems in stack
Ensure drill fluid is appropriately contained/disposed of
Ensure maintenance schedules are followed
Ensure housekeeping activities are completed
Process records
Forms
Assessment Cover Sheet
RIINHB309D - Conduct guided boring
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
RIINHB309D - Conduct guided boring
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent