RIIOGD203D - Prepare and operate drilling fluid systems
Assessor Resource
RIIOGD203D Prepare and operate drilling fluid systems
Assessment tool
Version 1.0 Issue Date: May 2024
This unit describes a participant’s skills and knowledge required to apply prepare and operate drilling fluid systems in Drilling.
This unit is appropriate for those working in assistant roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for operations
1.1 Access, interpret and apply drilling fluid system documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select the personal protective equipment appropriate for the work activity
1.5 Conform to safe working practices and current legislative and operational requirements
1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities
1.7 Assess geographic layout of the active, reserve and slug pits under work instruction
1.8 Assess operation of mud mixers, dump valves and equalising valves
1.9 Identify and locate mud pump and discharge system
2. Establish operational requirements
2.1 Clarify difficulties in carrying out the instructions with the relevant personnel
2.2 Confirm availability and status of necessary permits to work
2.3 Confirm availability of necessary third party utilities
2.4 Confirm availability of required quantities and type of consumables
2.5 Identify errors, omissions and shortages and take appropriate remedial action within functional responsibility
3. Select and test equipment
3.1 Identify and select equipment appropriate for the work to be performed
3.2 Confirm equipment is functional and fit for the purpose and the environment in which it will be used
3.3 Identify defects in the equipment and take appropriate remedial action within functional responsibility
4. Prepare drilling fluids
4.1 Confirm availability of sufficient quantities and types of fluids against operational requirements
4.2 Confirm tanks and mixing equipment are clean and free from contamination in accordance with instructions
4.3 Mix and treat fluids to specification
4.4 Obtain, correctly label in writing and store samples
4.5 Identify defects in the equipment and take appropriate remedial action within functional responsibility
5. Pump drilling fluids
5.1 Confirm recording and monitoring devices are preset to required parameters
5.2 Operate equipment
5.3 Identify faults and defects accurately and take appropriate remedial action within functional responsibility
5.4 Assist with obtaining samples, weigh, measure viscosity and record details
5.5 Operate pipe in the derrick manually and under supervision
5.6 Grease crown block and identify hanging sheaves
5.7 Record in writing data accurately at appropriate times and frequencies in accordance with operational requirements
6. Operate hopper system
6.1 Recognise operation of the hopper system
6.2 Operate and maintain hopper system and associated components
6.3 Measure, calculate and log in writing mud properties correctly
6.4 Recognise, record and report changes in returns of drilling fluid and pit volumes
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
1. Plan and prepare for operations
1.1 Access, interpret and apply drilling fluid system documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select the personal protective equipment appropriate for the work activity
1.5 Conform to safe working practices and current legislative and operational requirements
1.6 Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities
1.7 Assess geographic layout of the active, reserve and slug pits under work instruction
1.8 Assess operation of mud mixers, dump valves and equalising valves
1.9 Identify and locate mud pump and discharge system
2. Establish operational requirements
2.1 Clarify difficulties in carrying out the instructions with the relevant personnel
2.2 Confirm availability and status of necessary permits to work
2.3 Confirm availability of necessary third party utilities
2.4 Confirm availability of required quantities and type of consumables
2.5 Identify errors, omissions and shortages and take appropriate remedial action within functional responsibility
3. Select and test equipment
3.1 Identify and select equipment appropriate for the work to be performed
3.2 Confirm equipment is functional and fit for the purpose and the environment in which it will be used
3.3 Identify defects in the equipment and take appropriate remedial action within functional responsibility
4. Prepare drilling fluids
4.1 Confirm availability of sufficient quantities and types of fluids against operational requirements
4.2 Confirm tanks and mixing equipment are clean and free from contamination in accordance with instructions
4.3 Mix and treat fluids to specification
4.4 Obtain, correctly label in writing and store samples
4.5 Identify defects in the equipment and take appropriate remedial action within functional responsibility
5. Pump drilling fluids
5.1 Confirm recording and monitoring devices are preset to required parameters
5.2 Operate equipment
5.3 Identify faults and defects accurately and take appropriate remedial action within functional responsibility
5.4 Assist with obtaining samples, weigh, measure viscosity and record details
5.5 Operate pipe in the derrick manually and under supervision
5.6 Grease crown block and identify hanging sheaves
5.7 Record in writing data accurately at appropriate times and frequencies in accordance with operational requirements
6. Operate hopper system
6.1 Recognise operation of the hopper system
6.2 Operate and maintain hopper system and associated components
6.3 Measure, calculate and log in writing mud properties correctly
6.4 Recognise, record and report changes in returns of drilling fluid and pit volumes
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice
Yes
No
Comments/feedback
Access, interpret and apply drilling fluid system documentation and ensure the work activity is compliant
Obtain, read, interpret, clarify and confirm work requirements
Identify and address potential risks, hazards and environmental issues and implement control measures
Select the personal protective equipment appropriate for the work activity
Conform to safe working practices and current legislative and operational requirements
Resolve coordination requirements with others at the site prior to commencing, during and on completion of the work activities
Assess geographic layout of the active, reserve and slug pits under work instruction
Assess operation of mud mixers, dump valves and equalising valves
Identify and locate mud pump and discharge system
Clarify difficulties in carrying out the instructions with the relevant personnel
Confirm availability and status of necessary permits to work
Confirm availability of necessary third party utilities
Confirm availability of required quantities and type of consumables
Identify errors, omissions and shortages and take appropriate remedial action within functional responsibility
Identify and select equipment appropriate for the work to be performed
Confirm equipment is functional and fit for the purpose and the environment in which it will be used
Identify defects in the equipment and take appropriate remedial action within functional responsibility
Confirm availability of sufficient quantities and types of fluids against operational requirements
Confirm tanks and mixing equipment are clean and free from contamination in accordance with instructions
Mix and treat fluids to specification
Obtain, correctly label in writing and store samples
Identify defects in the equipment and take appropriate remedial action within functional responsibility
Confirm recording and monitoring devices are preset to required parameters
Operate equipment
Identify faults and defects accurately and take appropriate remedial action within functional responsibility
Assist with obtaining samples, weigh, measure viscosity and record details
Operate pipe in the derrick manually and under supervision
Grease crown block and identify hanging sheaves
Record in writing data accurately at appropriate times and frequencies in accordance with operational requirements
Recognise operation of the hopper system
Operate and maintain hopper system and associated components
Measure, calculate and log in writing mud properties correctly
Recognise, record and report changes in returns of drilling fluid and pit volumes
Forms
Assessment Cover Sheet
RIIOGD203D - Prepare and operate drilling fluid systems
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
RIIOGD203D - Prepare and operate drilling fluid systems
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent