List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare for pressure oxidation process | 1.1. Access, interpret and apply pressure oxidation process documentation and ensure the work activity is compliant 1.2. Obtain, read, interpret, clarify and confirm work requirements 1.3. Coordinate and communicate with other personnel using approved communication methods 1.4. Select and wear personal protective equipment appropriate for work activities 1.5. Select appropriate type of auxiliary equipment for work activities 1.6. Perform equipment pre-start checks 1.7. Identify and address potential risks, hazards and environmental issues, and implement control measures 1.8. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Start-up equipment in sequence | 2.1. Carry out start-up procedures and complete start-up checks according to plant configurations and system requirements 2.2. Confirm plant is operational |
3. Operate and monitor equipment | 3.1. Read and interpret data from equipment indicators to determine oxidation progress 3.2. Continuously inspect and monitor plant to identify oxidation defects and potential problems and take appropriate action 3.3. Adjust equipment to optimise oxidation performance and product quality 3.4. Control feed to oxidation equipment 3.5. Add oxygen to approved operating parameters 3.6. Carry out minor maintenance to maintain condition of the equipment 3.7. Complete all required written documentation clearly, concisely and on time 3.8. Pass on end of shift information verbally or in writing to oncoming shift |
4. Shutdown in sequence and/or isolate equipment | 4.1. Shutdown or isolate equipment based on process and safety requirements 4.2. Perform post shutdown or isolation checks 4.3. Restore plant to service |
5. Conduct housekeeping activities | 5.1. Clear work area and dispose of or recycle materials 5.2. Clean and maintain condition of equipment, ensure suitability for use, and address/report issues 5.3. Process records |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient completion of pressure oxidation including:
conducting start up, shut down and/or isolation of equipment in sequence
operating and monitoring equipment
carrying out minor maintenance
conducting housekeeping activities
diagnosing faults, reporting defects and identifying repair requirements
applying lifting techniques (manual, automated)
accurate record maintenance
works effectively with others to undertake and complete the pressure oxidation in a way that that meets all of the required outcomes including:
using a range of communications techniques and equipment to convey information to others
maintaining written and verbal reporting requirements and procedures
organising work activities to meet all task requirements
communicating clearly and concisely with others to receive and clarify work instructions
demonstrates completion of pressure oxidation that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
reading and interpreting and responding to data from equipment indicators
identifying oxidation defects and potential problems and taking appropriate action
adjusting equipment to optimise performance and product quality
controlling feed to equipment
adding oxygen
The candidate must demonstrate knowledge of conducting pressure oxidation through:
accessing, interpreting and applying organisation and site requirements and procedures for:
WHS, site safety and emergency requirements
environmental principles/procedures
equipment safety requirements
hazardous substance procedures and consequences of spills
operational procedures and checks
equipment break-down
equipment isolation
contaminant identification
depressant identification and activator principles
monitoring equipment processes, limitations and operating parameters
monitoring high pressures dangers and characteristics
interpreting metallurgical and technical data
complying with pressure oxidation plant (basic) and process
identifying types of ores and grades (basic)
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level