List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
1. Plan and prepare to conduct dewatering activities in surface operations | 1.1 Access, interpret and apply dewatering activities in surface operations documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Develop dewatering plan 1.4 Select and check for faults all tools and equipment to carry out tasks consistent with the requirements of the job 1.5 Prepare sumps and pads to work requirements 1.6 Transport pump, lines, fittings, associated equipment and required tools to and from the site 1.7 Identify and address potential risks, hazards and environmental issues, and implement control measures 1.8 Select and wear personal protective equipment appropriate for work activities 1.9 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency |
2. Install, operate and recover dewatering equipment | 2.1 Communicate and coordinate with others at the site throughout the work activity 2.2 Install and dismantle dewatering equipment 2.3 Carry out pre-start, start-up, parkup, shutdown and secure equipment procedures 2.4 Start, test and adjust dewatering equipment 2.5 Monitor and adjust dewatering equipment 2.6 Complete work activity in accordance with the work plan |
3. Carry out operator maintenance | 3.1 Carry out dewatering equipment and systems inspections and fault finding 3.2 Carry out operational maintenance, servicing, lubricating and housekeeping tasks 3.3 Process records and reports |
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
locates and applies relevant documentation, policies and procedures
implements the requirements, procedures and techniques for the safe, effective and efficient conducting of dewatering activities in surface operations including:
applying operational safety requirements
accessing, reading, interpreting and applying technical information
selecting dewatering methods
interpreting ground conditions
pumping equipment operating requirements
identifying potential hazards
responding to changing circumstances
complying with environmental requirements
working in confined spaces
applying equipment records maintenance requirements
interpreting and applying work instructions
selecting and using the required tools and equipment
selecting and wearing appropriate personal protective equipment
being prepared for emergency
works effectively with others to undertake and complete dewatering activities in surface operations that meet all of the required outcomes including:
using a range of communication techniques to convey information to others
maintaining written and verbal reporting requirements and procedures
demonstrates completion of conducting dewatering activities ins urface operations that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:
installing and dismantling dewatering equipment
completing pre-start, start-up and shutdown procedures
starting, testing, monitoring and adjusting dewatering equipment
inspecting dewatering equipment and systems
maintaining, servicing and lubricating equipment
completing the work plan
The candidate must demonstrate knowledge in conducting dewatering activities in surface operations through:
accessing, interpreting and applying technical information
applying techniques for communicating with and coordinating activities with others
selecting appropriate dewatering methods
interpreting ground conditions
complying with environmental requirements
identifying and using site hazard and response procedures
identifying and using site risk control procedures
identifying and complying with site requirements and constraints
identifying site geological and survey data
identifying and applying dewatering equipment pre-start, start-up, operating and shutdown procedures and techniques
identifying dewatering equipment characteristics, technical capability and limitations
identifying and applying drainage principles and processes
An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
this unit must be assessed in the context of this sector’s work environment; and,
this unit must be assessed in compliance with relevant legislation/regulation and using policies, procedures, processes and operational manuals directly related to the industry sector for which it is being assessed; and,
assessment may be conducted in conjunction with the assessment of other Units of Competency; and,
assessment must confirm consistent performance can be applied in a range of relevant workplace circumstances; and,
assessors must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through the minimum years of current* work experience specified below in an Industry sector relevant to the outcomes of the unit; or,
where the assessor does not meet experience requirements a co-assessment or partnership arrangement must exist between the qualified assessor and an Industry subject matter expert. The Industry subject matter expert should hold the unit being assessed (or an equivalent unit) and/or demonstrate equivalence of skills and knowledge at the unit level. An Industry technical expert must also demonstrate skills and knowledge from the minimum years of current work experience specified below in the Industry sector, including time spent in roles related to the unit being assessed; and,
assessor and Industry subject matter expert requirements differ depending on the Australian Qualifications Framework Level (AQF) of the qualification being assessed and/or Industry Sector as follows:
Industry sector | AQF** Level | Required assessor or Industry subject matter expert experience |
Drilling, Metalliferous Mining, Coal Mining, Extractive (Quarrying) and Civil Construction | 1 | 1 Year |
2 | 2 Years |
Drilling, Coal Mining and Extractive (Quarrying) | 3-6 | 3 Years |
Metalliferous Mining and Civil Construction | 3-6 | 5 Years |
Other sectors | Where this Unit is being assessed outside of the Resources and Infrastructure Sectors assessor and/or Industry subject matter expert experience should be in-line with industry standards for the sector in which it is being assessed and where no Industry standard is specified should comply with any relevant regulation. |
*Assessors can demonstrate current work experience through employment within Industry in a role relevant to the outcomes of the Unit; or, for external assessors this can be demonstrated through exposure to Industry by conducting frequent site assessments across various locations.
**Where a unit is being delivered outside of a Qualification the first numeric character in the Unit code should be considered to indicate the AQF level