This unit involves the skills and knowledge required to undertake the repair of compressors, turbines and associated equipment on gas turbine units.

The repair of compressors, turbines and associated equipment on gas turbine units ensures the restoration of any broken, damaged or failed devices, equipment or parts of a gas turbine unit to an acceptable operating condition.

Competency in this unit requires the ability to plan work, disassemble gas turbine, inspect gas turbine components, repair gas turbine and components, reassemble gas turbine and complete all work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop/area

Power generation maintenance personnel are typically trained and authorised to receive permits to work.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Note: Workplace practice

The application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.

You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)

List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice	Yes	No	Comments/feedback
Equipment and plant is prepared for reassembly of gas turbine, in accordance with workplace procedures
Components are refitted, in accordance with workplace procedures and manufacturers' specifications
Gas turbine is assembled, in accordance with workplace procedures and manufacturers' specifications
Gas turbine is test run and operating characteristics are monitored to ensure compliance with manufacturers specifications, in accordance with workplace procedures
Work is completed and appropriate personnel are notified, in accordance with workplace procedures
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures
Tools and equipment are maintained and stored in accordance with workplace procedures
Work completion details are finalised, in accordance with workplace procedures
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
Isolations for work are confirmed, in accordance with workplace procedures
Components are cleaned and inspected, in accordance with workplace procedures
Repairs are carried out, in accordance with workplace procedures
Equipment and plant is prepared for reassembly of gas turbine, in accordance with workplace procedures
Work is completed and appropriate personnel are notified, in accordance with workplace procedures

Assessment Cover Sheet

UEPMNT407 - Repair a gas turbine unit

Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEPMNT407 - Repair a gas turbine unit

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: