Elements and Performance Criteria
- Prepare for work
- Work instructions are used to determine job requirements, including method, process and equipment
- Job specifications are read and interpreted
- OHS requirements, including personal safety needs, are observed throughout the work
- Electronic system protection devices, processes and precautions are identified appropriate to application
- Equipment and tooling are identified and checked for safe and effective operation
- Procedures are determined to minimise task time
- Test control system, diagnose faults and determine service/repair requirements
- Correct information is accessed and interpreted from manufacturer/component supplier specifications
- Tests are carried out according to manufacturer/component supplier recommended procedures using tooling, equipment and techniques
- Testing is completed without causing damage to component or system
- Test results are used to diagnose system/component faults
- Service/repair requirements are determined
- Testing is carried out according to industry regulations/ guidelines OHS and enterprise/procedures policies
- Service/repair spark ignition engine management systems
- Correct information is accessed and interpreted from manufacturer/component supplier specifications
- Service/repair requirements are carried out according to manufacturer/component supplier recommended specifications and procedures
- Service/repair is completed without causing damage to component or system
- Electronic systems are tested and results are documented in accordance with workplace policies and procedures
- Service, repair and retesting are carried out according to industry regulations/guidelines, OHS and enterprise/ procedures policies
- Workplace and equipment documents are completed in accordance with site requirements
- Clean up work area and maintain equipment
- Material that can be reused is collected and stored
- Waste and scrap are removed following workplace procedures
- Equipment and work area are cleaned and inspected for serviceable conditions in accordance with workplace procedures
- Unserviceable equipment are tagged and faults identified in accordance with workplace procedures
- Operator maintenance is completed in accordance with manufacturer/component supplier specifications and workplace procedures
- Tooling is maintained in accordance with workplace procedures