Elements and Performance Criteria
- Prepare to dismantle air conditioning compressor
- Job requirements are determined from workplace instructions
- Australian automotive code of practice: Control of refrigerant gases during manufacture, installation, servicing or de-commissioning of motor vehicle air conditioners is sourced and interpreted
- Dismantling information is sourced and interpreted
- Dismantling options are analysed and those most appropriate to the circumstances are selected
- Hazards associated with the work are identified and risks are managed
- Dismantling tools and equipment are selected and checked for serviceability
- Dismantle and evaluate compressor and components
- Compressor is dismantled in a logical sequence according to manufacturer and workplace procedures, and safety and environmental requirements,and without causing unnecessary damage to components or systems
- Components are cleaned for evaluation according to workplace procedures and safety and environmental requirements
- Components are measured and compared with manufacturer specifications and serviceability is determined
- Component repair method is determined
- Unserviceable parts are identified and replacement parts sourced
- Carry out overhaul
- Overhaul information is sourced and interpreted
- Overhaul options are analysed and those most appropriate to the circumstances are selected
- Overhaul tools and equipment are selected and checked for serviceability
- Components are machined, repaired and replaced as required, and adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and Australian automotive code of practice
- Assemble compressor and components
- Compressor is assembled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
- Tolerances and clearances are measured against manufacturer specifications and necessary adjustments are made
- Assembly of compressor is completed within workplace timeframes and without causing damage to other components or systems
- Post-assembly testing is carried out according to workplace procedures and safety and environmental requirements, and any problems detected as having been introduced during the assembly process are rectified
- Complete work processes
- Final inspection is made to ensure work is to workplace expectations and compressor is presented ready for use or storage
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
- Workplace documentation is processed according to workplace procedures
- Prepare to dismantle air conditioning compressor
- Job requirements are determined from workplace instructions
- Australian automotive code of practice: Control of refrigerant gases during manufacture, installation, servicing or de-commissioning of motor vehicle air conditioners is sourced and interpreted
- Dismantling information is sourced and interpreted
- Dismantling options are analysed and those most appropriate to the circumstances are selected
- Hazards associated with the work are identified and risks are managed
- Dismantling tools and equipment are selected and checked for serviceability
- Dismantle and evaluate compressor and components
- Compressor is dismantled in a logical sequence according to manufacturer and workplace procedures, and safety and environmental requirements,and without causing unnecessary damage to components or systems
- Components are cleaned for evaluation according to workplace procedures and safety and environmental requirements
- Components are measured and compared with manufacturer specifications and serviceability is determined
- Component repair method is determined
- Unserviceable parts are identified and replacement parts sourced
- Carry out overhaul
- Overhaul information is sourced and interpreted
- Overhaul options are analysed and those most appropriate to the circumstances are selected
- Overhaul tools and equipment are selected and checked for serviceability
- Components are machined, repaired and replaced as required, and adjustments are carried out according to manufacturer specifications, workplace procedures, safety and environmental requirements, and Australian automotive code of practice
- Assemble compressor and components
- Compressor is assembled according to manufacturer specifications, workplace procedures, and safety and environmental requirements
- Tolerances and clearances are measured against manufacturer specifications and necessary adjustments are made
- Assembly of compressor is completed within workplace timeframes and without causing damage to other components or systems
- Post-assembly testing is carried out according to workplace procedures and safety and environmental requirements, and any problems detected as having been introduced during the assembly process are rectified
- Complete work processes
- Final inspection is made to ensure work is to workplace expectations and compressor is presented ready for use or storage
- Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
- Tools and equipment are checked and stored, and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures
- Workplace documentation is processed according to workplace procedures