Elements and Performance Criteria
- Plan and prepare.
- Work instructions, including plans, specifications, quality requirements and operational details, are obtained, confirmed and applied from relevant information to prepare for basic levelling activities.
- Safety (OHS) requirements are followed in accordance with safety plans and policies.
- Signage and barricade requirements are identified and implemented.
- Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement.
- Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied.
- Set up and use levelling device.
- Heights or levels to be transferred/established are identified from project plans or instructions for levelling procedures.
- Levelling devices are set up and tested in accordance with manufacturer instructions, including levelling device tolerance checks.
- Levelling staffs are accurately applied.
- Levels are shot and heights transferred to required location and marked and/or recorded to job requirements.
- Results of levelling procedure are documented to organisational requirements.
- Clean up.
- Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.
- Tools and equipment are cleaned, checked, maintained, including levelling device operator maintenance, and stored in accordance with manufacturer recommendations and standard work practices.