Elements and Performance Criteria
- Plan and prepare to set up, operate and maintain indirect action EPTs.
- Review and clarify task to set up, operate and maintain indirect action EPTs.
- Review work health and safety (WHS)requirements for the task in accordance with safety plans and policies.
- Identify safety signage and barricade requirements.
- Review environmental requirements for the task in accordance with environmental plans and legislative requirements.
- Calculate material quantity requirements.
- Check EPTs for operation in accordance with manufacturers’ specifications and safety requirements for use of EPT.
- Set out fasteners.
- Erect identified safety signage and barricades, and fit personal protective equipment (PPE).
- Select fastener in accordance with requirements of the job.
- Set-out fasteners adhering to minimum distances for set outfrom edge of substrate material in accordance with requirements.
- Position material, check it is level, and temporarily fix or clamp into designed position in accordance with detailed drawings.
- Operate EPTs.
- Select charge in accordance with the requirements for material, base and penetration.
- Install any attachmentsand accessories to EPT in accordance with manufacturers’ specifications and WHS requirements.
- Load fastener and charge into EPT in accordance with manufacturers’ specification.
- Carry out EPT operation and fix fastener into place in accordance with manufacturers’ specifications and legislative requirements.
- Check depth of fastening penetration and adjust power regulating device in accordance with conditions.
- Carry out misfire procedures in accordance with manufacturers’ specifications and legislative requirements.
- Remove temporary holdings and fixings without damage to material.
- Maintain EPTs and kit.
- Check safety features of tools for serviceability in accordance with manufacturers’ specifications.
- Clean and lubricate tools in accordance with manufacturers’ specifications.
- Carry out periodic maintenance service in accordance with manufacturers’ specifications.
- Replenish diminished stocks of charges and fasteners to designed effectiveness of EPT kit.
- Check and complete logbook and record maintenance in accordance with manufacturers’ specifications.
- Secure and store EPT equipment and charges.
- Clean up after operating EPTs.