Elements and Performance Criteria
- Monitor dust explosion risk factors
- Establish and monitor procedures for detecting potential explosive atmosphere
- Set procedures for reporting visible dust leaks
- Confirm and enforce no smoking policy
- Establish and monitor reporting regime for potential ignition sources
- Establish and supervise manual and automatic temperature, smoke and moisture monitoring for all grain, flour, feed and other by-product storage
- Establish and confirm regulation of systems to minimise fungal and insect infestation caused by temperature increases
- Establish dust control procedures
- Install and monitor dust aspiration or suction ventilation systems according to systems’ specifications
- Establish dust-checking procedures for all confined spaces
- Establish monitoring procedures for dust collector performance and output
- Establish procedures for resealing all dust leaks
- Undertake random and periodical checks on performance of dust control procedures
- Assess and approve any variation in cleaning and hygiene procedures
- Minimise storage of combustible materials in mill
- Establish minimum dust levels required for mandatory use of personal protective equipment
- Establish procedures for monitoring and control of environmental dust release
- Integrate equipment use, monitoring and maintenance with dust control procedures
- Develop regular cleaning schedule for all surfaces in contact with graining or flour according to workplace requirements
- Establish and confirm mill equipment condition monitoring schedule with maintenance department
- Establish regular lubrication schedules for bearings, pulleys, shafts and other moving and friction surfaces
- Promote use of anti-static materials where possible
- Establish approval, tagging and monitoring procedures for use of all portable tools and equipment in mill
- Establish fire and dust explosion suppression systems
- Review adequacy of current dust control and dust explosion relief equipment and arrange for any required maintenance
- Arrange for any required additional dust control/dust explosion relief equipment in existing protected areas
- Investigate potential for use of fire and explosion suppression systems in areas not currently protected
- Locate and establish inspection regime for all explosion relief panels
- Set test and maintenance procedures for all existing fire and explosion suppression systems
- Supervise dust and fire control training