Elements and Performance Criteria
- Monitor production process
- All details required for the job are checked and confirmed against job specifications
- The supply of materials throughout the run is maintained
- Machine is run at optimum speed for maintaining quality outputs
- Samples from the machine are selected and checked to ensure they conform to job specifications
- Machines are adjusted to maintain quality of outputs
- Maintain quality
- Correct procedures for the removal of waste are followed according to enterprise procedures
- Samples are continuously monitored for defects and defects are removed
- The efficiency, quality and output rate of the production run are monitored for problems and any deficiencies resolved
- Milled cavities are checked to ensure the right cavity depth for the chips
- Die cuts are correct and meet quality standards
- The correct amount of glue is applied by the dispensing station
- The chips are correctly inserted into the cavity by the implanting module
- Print quality meets the standards in the job specifications or sample
- Code and check chips
- Monitor printer unit
- Ink and solvent levels are monitored and filled when required and stock levels are recorded according to enterprise procedures
- Quality of inkjet is monitored to ensure it conforms to job specifications
- Chemicals are handled according to OHS requirements
- Drying is checked as sufficient to key ink to the substrate
- Identify problems
- Unload and pack cards
- Cards are unloaded according to OHS requirements, manufacturer's specifications and enterprise procedures
- Reconciliation and final quality check are documented
- Cards are prepared (stacked, wrapped and labelled) for next process according to manufacturer's specifications and enterprise procedures
- Wastage is recorded and disposed of according to enterprise procedures
- Shut down machine
- Dispensing needle is moved to the safety position and solvent is checked to ensure coverage of the needle
- Inkjet is cleaned and shutdown according to manufacturer's specifications
- The encoding computer is shut down in the correct manner to ensure no loss of data
- The milling vacuum is emptied and cleaned
- The machine and work area are cleaned according to enterprise procedures
- The air supply is turned off
- Waste chemicals are handled and disposed of according to OHS requirements