Elements and Performance Criteria
- Prepare to solve problems within given telecommunications circuitry/cable
- Determine need to test live or isolate circuitry
- Use specifications or job documentation to verify circuit/signal parameters that are to be measured for a given problem
- Select appropriate test equipment and measure output voltage of digital device for high and low logic states
- Identify by calculation or given specifications and record expected values within given electrical circuit
- Determine appropriate fault-finding technique to be used for given problem
- Select appropriate test equipment and measure circuit according to methodologies already determined
- Select and source required hand tools/equipment for problem-solving telecommunications circuitry
- Test and record electrical operating parameters within given telecommunications circuitry/cable
- Apply work health and safety (WHS) procedures to given task
- Isolate circuitry from live source when risk process has indicated that action be taken
- Connect appropriate test devices within electrical circuit to obtain operational measurements as pre-determined
- Reduce circuit path following accepted fault-finding methodologies and test
- Record measured results obtained
- Analyse and report findings