Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare for work
   • Planned maintenance program is accessed to determine servicing requirements
   • Inspections are conducted and additional non-routine servicing requirements are determined
   • Manufacturer specifications for equipment are obtained
   • Tasks are planned and sequenced in conjunction with others involved in or affected by servicing work
   • Equipment is safely isolated according to regulations and work health and safety (WHS)/occupational health and safety (OHS) requirements
   • Tools and equipment are selected and checked for serviceability
   • Work area is prepared
2. Inspections are conducted and additional non-routine servicing requirements are determined
3. Manufacturer specifications for equipment are obtained
4. Tasks are planned and sequenced in conjunction with others involved in or affected by servicing work
5. Equipment is safely isolated according to regulations and work health and safety (WHS)/occupational health and safety (OHS) requirements
6. Tools and equipment are selected and checked for serviceability
7. Carry out routine service
   • Equipment is inspected throughout servicing and inspection results are compared with manufacturer specifications
8. Servicing tasks are carried out to specifications
9. Mechanical equipment and system components are checked with appropriate instruments
10. Unserviceable equipment is tagged according to workplace procedures and appropriate personnel are notified
11. Repair and replace faulty components
    • Faulty items or components are removed using appropriate tools and equipment according to workplace procedures
12. Replaceable items are selected or serviceable items are fitted according to manufacturer specifications
13. Adjustments are made to equipment or components to ensure compliance with specifications
14. Operational check is carried out on system to ensure compliance with manufacturer specifications
15. Clean up and complete documentation
    • Work area is cleared and cleaned
16. Materialsare disposed of or recycled according to legislative and workplace requirements
17. Tools and equipment are cleaned, checked and stored according to workplace procedures
18. Maintenance report is completed according to workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

---