Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Select appropriate tools for work
   • Work requirements are interpreted in accordance with workplace procedures and manufacturer instructions
2. Appropriate hand and power tools are selected for required tasks
3. Selected hand and power tools are checked for serviceability in accordance with workplace procedures
4. Defective tools are identified, reported and appropriate repair or replacement action is taken in accordance with workplace procedures
5. Blunt or worn tools are identified and appropriate action is taken to replace, sharpen or rectify in accordance with workplace procedures and manufacturer instructions
6. Instructions for the use of tools are accessed and interpreted, as required, in accordance with workplace procedures
7. Use hand and power tools
   • Work area, work pieces and tools are prepared for required tasks in accordance with workplace procedures
8. Other personnel in work area are made aware of work being carried out as required by safety management procedures
9. Work is marked out using appropriate marking out tools in accordance with workplace procedures
10. Hand and power tools are used as directed in accordance with workplace procedures and manufacturer instructions
11. Desired work outcomes are achieved to job specifications in accordance with workplace procedures
12. Follow safety and hazard control procedures
    • Required safety precautions are followed when using hand and power tools in accordance with workplace procedures and regulations
13. Operational hazards are identified when using hand and power tools and action is taken to minimise or eliminate risk to self, other personnel, the vessel and the environment
14. Care for hand and power tools
    • Tools are used for intended purpose according to manufacturer instructions in accordance with workplace procedures
15. Tools are cleaned and stored after use according to manufacturer instructions and in accordance with workplace procedures
16. Tools are sharpened according to manufacturer instructions and in accordance with workplace procedures
17. Tools are adjusted, tightened and/or lubricated according to manufacturer instructions in accordance with workplace procedures
18. Grinding wheels are dressed and made true according to manufacturer instructions and in accordance with workplace procedures
19. Defective or worn tools and tool components are identified, marked as required and reported, and appropriate repair or replacement action is taken in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include: adapting to differences in vessels, equipment and standard operating procedures (SOPs) applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and work practices caring for air-operated tools, their supply hoses and hose connections, safely and correctly caring for hand and power tools safely and correctly, including cleaning, sharpening or adjusting tools according to SOPs communicating with other workplace personnel using effective: listening techniques questioning to confirm understanding verbal and non-verbal language completing work systematically with required attention to detail complying with relevant maritime and safety regulatory requirements dressing and truing a grinding wheel following required work schedule according to company requirements following the orders and instructions of the officer of the watch or designated supervisor marking out work to specifications, measuring and checking the quality of finished work, including the correct use of: adjustable gauge callipers centre punch hammers dividers rules and tapes scribers squares trammels vernier callipers and micrometer reading, interpreting and applying documentation that includes technical specificity, including: basic instructions and SOPs work specifications and drawings recognising routine problems that may occur when using and caring for hand and power tools, including identifying: glazed, loaded or untrue grinding wheel condition hand and power tools that are found to be defective or worn incidents and problems involving the use of hand and power tools selecting appropriate hand and power tools to complete assigned tasks storing tools and equipment after use according to SOPs taking appropriate action to promptly report incidents, problems and hazards, including equipment faults using personal protective equipment (PPE), including: boots eye and ear protection masks using tools and equipment safely according to: International Safety Management (ISM) Code and associated vessel safety management system (SMS) and procedures tool manufacturer instructions WHS/OHS regulations and hazard prevention policies and procedures workplace procedures and housekeeping processes working safely and collaboratively with others when using and caring for hand and power tools.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of: appropriate selection of PPE characteristics and identifying features of common engineering drill bits environmental protection measures when carrying out basic engineering tasks established procedures for the use and care of hand or power tools required for work tasks hazards and related safety precautions when using hand or power tools onboard a vessel, including: electric shock moving and rotating blades and attachments non-compliance with safe working procedures poor housekeeping procedures sharp blades sparks in areas where flammable and explosive substances are stored unsecured machinery, components or equipment using tools beyond safe working limits or faulty equipment ISM Code and safety management procedures as they relate to the use of hand and power tools onboard a vessel procedures for dressing and/or truing a grinding wheel procedures for identifying a glazed, loaded or untrue grinding wheel condition relevant WHS/OHS and pollution control legislation and policies, including the International Convention for the Prevention of Pollution from Ships (MARPOL) standard procedures for marking out work to specifications and measuring and checking the quality of finished work.

---