Elements and Performance Criteria
- Test synchro and servo system components
- Synchro and servo system components are correctly prepared and connected to the appropriate test equipment/rig in accordance with approved procedures
- Components are functionally tested or cycled through the prescribed test procedures in accordance with maintenance manual for evidence of serviceability or malfunction while observing all relevant work health and safety (WHS) requirements
- Faults or unserviceabilities are correctly identified and recorded on appropriate maintenance documentation
- Align synchro and servo system components
- Troubleshoot synchro and servo system components
- Available information from maintenance records and inspection and test results is used, where necessary, to assist in fault determination
- Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting
- Synchro and servo system component faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required
- Fault rectification requirements are determined