Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Inspect twin engine aircraft electrical systems and components
   • Relevant maintenance documentation and modification status, including system defect reports where relevant, are used to identify specific inspection requirements
   • Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual
   • DC electrical system is visually or physically checked for external signs of defects in accordance with applicable maintenance manual
   • Defects are correctly identified and reported
2. Test/adjust twin engine aircraft electrical systems
   • Aircraft and system are prepared in accordance with applicable maintenance manual for the application of power/system operation
   • Electrical system is functionally tested, in accordance with maintenance manual, for evidence of serviceability or malfunction
   • System calibration or adjustments are performed in accordance with maintenance manual, as appropriate
3. Troubleshoot twin engine aircraft electrical systems
   • Available information from maintenance documentation and inspection and test results is used, where necessary, to assist in fault determination
   • Maintenance manual fault diagnosis guides and logic processes are used to ensure efficient and accurate troubleshooting
   • Specialist advice is obtained, where required, to assist with the troubleshooting process
   • System faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required and in accordance with standard enterprise procedures
   • Rectification requirements are determined
4. Remove and install twin engine aircraft electrical system components
   • System is rendered safe and prepared in accordance with the applicable maintenance manual and isolation tags are fitted where necessary to ensure personnel safety
   • Electrical component removal is carried out in accordance with the applicable maintenance manual
   • Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
   • Removed components are tagged and packaged in accordance with specified procedures
   • Electrical components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life
   • Physical installation of electrical components is performed in accordance with the applicable maintenance manual, ensuring appropriate adjustment/alignment with mechanical interface is carried out
   • System is reinstated to correct operational condition in preparation for testing, as necessary

Required Skills

Required skills

Look for evidence that confirms skills in applying relevant occupational health and safety OHS practices using approved maintenance documentation and aircraft publications relating to twin engine aircraft electrical systems identifyinglocating DC multigenerator power generation regulation distribution and control systems and components ie regulators and bus bars electrical propeller control systems and components such as feathering and synchronising systems batteries in dual battery installations and associated mounting equipment including related antivibration aids fire warning and extinguishing systems and components identification of halogen eg BCF fire extinguishers combustion heating systems equipment cooling and ventilation fuel storage and distribution system electrical components master and central warning systems correctly connecting DC generators and alternatorrectifier generators in multigenerator systems and paralleling generator output recognising system and component defectsexternal damage correct installation connection of plugs terminations attaching hardware including cablingharnesses and security in the above systems and system components applying logic processes taking and interpreting electrical measurements using test equipment and appropriate wiring diagrams and manuals to isolate malfunctions in the above systems performing system functional tests and checks to isolate system faults and assess postmaintenance serviceability

Required knowledge

Look for evidence that confirms knowledge of system testing procedures and paralleling of generator output the basic layout block diagram level function and operation of DC multigenerator and alternatorrectifier generator regulation and distribution systems and components electrical propeller control systems such as feathering and synchronising systems and system components dual battery systems and associated mounting equipment including related antivibration aids fire warning and extinguishing systems and system components including regulatory requirements relating to halogen eg BCF fire extinguishers combustion heating systems and system components equipment cooling and ventilation systems and system components fuel storage and distribution systems and system components master and central warning systems and system components maintenance requirements and troubleshooting procedures for the above electrical systems relevant OHS practices relevant maintenance manuals relevant regulatory requirements and standard procedures

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to inspect test and troubleshoot the DC electrical systems and components of twin piston engine aircraft and remove and install components including looms cables and connection hardware while observing all relevant safety precautions
Critical aspects for assessment and evidence required to demonstrate competency in this unit	The underlying skills inherent in this unit should be transferable across a range of inspection testing and troubleshooting applications including the timely involvement of supervisors or other trades associated with twin piston engine aircraft DC electrical systems and components It is essential that system testing procedures cleanliness requirements and safety precautions applicable to the system being maintained are fully observed understood and complied with as well as work practices associated with electrostatic sensitive devices Ability to interpret inspection procedures and specifications allowable limits and apply them in practice is critical Evidence of transferability of skills and knowledge related to inspection testing and troubleshooting and component removal and installation is essential This is to be demonstrated through application across a range of aircraft electrical systems and components listed in the Range Statement The application of testing procedures should clearly indicate knowledge of system operation the relationship of individual components and the links with other systems if applicable within the limits of the aircraftsystem fault finding guide before undertaking any action The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on electrical looms cables and connection hardware and on each system in Range Statement Groups to and on at least one major componentline replacement unit LRU in each case Groups andor may be omitted if they are not applicable to the enterprise For Group competency may be demonstrated through the performance of a battery check Component removal and installation competencies are to be demonstrated on at least one component from each of Groups to Groups andor may be omitted if they are not applicable to the enterprise This shall be established via the records in the Log of Industrial Experience and Achievement or where appropriate an equivalent Industry
Context of and specific resources for assessment	Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance documentation It is also expected that general purpose tools and test equipment found in most routine situations would be used where appropriate
Method of assessment
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Note	Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide
DC electrical systems	DC electrical systems may include: 1. DC multi-generator and alternator/rectifier generator regulation and distribution systems and components 2. Electrical propeller control systems, such as feathering systems (where applicable to the enterprise) 3. Batteries in dual battery installations and associated mounting equipment, including related anti-vibration aids 4. Fire warning and extinguishing systems, including handling of halogen fire extinguishers (where applicable to the enterprise) 5. Combustion heating systems (where applicable to enterprise) 6. Equipment cooling and ventilation 7. Fuel storage and distribution systems 8. Master and central warning systems (where applicable to enterprise)
Troubleshooting	Troubleshooting involves the use of fault-finding charts or similar, to line replacement level
Electrical components	Electrical components include: 9. Components of multi-generator regulation and distribution systems 10. Electrical propeller control system components (where applicable to the enterprise) 11. Batteries in dual battery installations and associated mounting equipment, including related anti-vibration aids 12. Fire warning and extinguishing system components (where applicable to the enterprise) 13. Combustion heaters and associated components (where applicable to enterprise) 14. Equipment cooling and ventilation components 15. Fuel storage and distribution system electrical components 16. Master and central warning system components (where applicable to enterprise)
	Application of this unit may relate to: scheduled or unscheduled maintenance individual or team-related activities
Procedures and requirements	Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

---