Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Load mixer (mill/muller)
   • All pre start-up checks are performed safely and according to standard operating procedures.
   • Formula for sand mix is determined according to standard operating procedures.
   • Materials are measured and loaded according to formula specification.
2. Mix sand
   • Sand is mixed for correct time to specifications.
   • The performance of mixer and the condition of the sand is monitored.
   • Material supply is maintained.
   • Faults are reported.
3. Take and test samples
   • Sample is correctly extracted.
   • Test is applied in accordance with standard operating procedures.
   • Test results are compared against specifications.
   • Adjustments to formula/mix are made as required in accordance with standard operating procedures.
4. Discharge mixture
   • Load is charged correctly according to standard operating procedures.
   • Unwanted treated sand is disposed of according to standard operating procedures.
5. Clean mixer
   • Mixer is shut down to standard safety and operating procedures.
   • Mixer is cleaned according to standard operating procedures.

Required Skills

Required skills

Look for evidence that confirms skills in reading and following written instructions and standard operating procedures setting parameters for mixing loading mixers mixing sand and monitoring the process sampling and testing mixed sand discharging sand closing down and cleaning using measurement skills for preparing and mixing sand within the scope of this unit

Required knowledge

Look for evidence that confirms knowledge of characteristics safe handling procedure and mixture applications of sand and binding agent moulding requirements mixers applications loading operating and unloading procedures volumes quantities ratios and percentages sampling testing and acceptance criteria for mixed sand procedures for cleaning and shutting down mixer environmental requirements for the disposal of unwanted sand use and application of personal protective equipment safe work practices and procedures hazards and control measures related to preparing and mixing sand for metal moulding

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to prepare and mix moulding sand
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria including required knowledge and be capable of applying the competency in new and different situations and contexts
Context of and specific resources for assessment	This unit may be assessed on the job off the job or a combination of both on and off the job Where assessment occurs off the job that is the candidate is not in productive work then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team The assessment environment should not disadvantage the candidate This unit could be assessed in conjunction with any other units addressing the safety quality communication materials handling recording and reporting associated with mixing moulding sand or other units requiring the exercise of the skills and knowledge covered by this unit
Method of assessment	Assessors should gather a range of evidence that is valid sufficient current and authentic Evidence can be gathered through a variety of ways including direct observation supervisors reports project work samples and questioning Questioning techniques should not require language literacy and numeracy skills beyond those required in this unit of competency The candidate must have access to all tools equipment materials and documentation required The candidate must be permitted to refer to any relevant workplace procedures product and manufacturing specifications codes standards manuals and reference materials
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Materials	Sand, silica, zircon, chromite, mixtures, water
Faults	Chemical ratios - acid, binder, water
Mixer	Batch and continuous mixers

---