Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine job requirements
   • Follow standard operating procedures (SOPs)
2. Comply with work health and safety (WHS) requirements at all times
3. Use appropriate personal protective equipment (PPE) in accordance with SOPs
4. Identify job requirements from specifications, drawings, job sheets or work instructions
5. Plan commissioning procedure
   • Determine control system format and understand operational intent
6. Sequence commissioning procedures effectively to meet requirement of components and control application
7. Check control system installation
   • Verify correct installation of system components against specifications
8. Ensure appropriate test equipment is functional and calibrated before use
9. Ensure components or control loop/system is powered up and checked for correct supply in accordance with specifications
10. Ensure all readings/measurements are obtained, interpreted and recorded
11. Adjust control system and assess performance
    • Adjust control loop/system components to meet control characteristics, application and process specifications utilising appropriate techniques
12. Make final verifications including any operational adjustments to ensure required performance
13. Commission modifications
    • Ensure necessary modifications to change performance in order to meet manufacturers' or operational specifications or safety and legislative requirements are undertaken or actioned
14. Provide reports on system/process characteristics for warranty, handover and legislative purposes
15. Document all modifications and record result according to SOPs

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Commissioning includes:	the development of a commissioning procedure, testing of operation and adjustment to conform to specification
Control system includes:	closed or open on continuous or step process control systems. Loop/system control can incorporate the use of pneumatics, electrical, electronics, hydraulics or a combination
System components include one (1) or more of the following:	all instruments and devices which make up or control a loop/system, including: sensing devices control devices actuators transducers

---