Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Measure features
   • Measure features and define probe movement parameters according to SOPs
   • Dimension basic features according to specifications
   • Report operator notes
   • Insert dimension descriptions
2. Determine job requirements
   • Follow standard operating procedures (SOPs)
3. Comply with work health and safety (WHS) requirements at all times
4. Use appropriate personal protective equipment (PPE) in accordance with SOPs
5. Identify job requirements from specifications, drawings, job sheets or work instructions
6. Identify part program parameters
   • Select appropriate units to comply with specifications
7. Specify part program name according to SOPs
8. Establish single probe configurations
   • Determine single probe configuration
9. Determine probe angles and qualify in accordance with SOPs
10. Position/align component
    • Position and orient component/part to specifications
11. Create manual alignment according to SOPs
12. Create single direct computer control (DCC) alignment according to SOPs
    • Measure features and define probe movement parameters according to SOPs
13. Dimension basic features according to specifications
14. Insert dimension descriptions
15. Verify and back up the program
    • Verify execution and accuracy of program according to SOPs
16. Edit program, if required
17. Output results to various formats according SOPs
18. Archive and back up program

Range Statement

No range of conditions provided for this unit.

---