Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Identify the hazards and effects of ionizing radiation in the workplace
   • The source of ionizing radiation is identified in accordance with relevant organisational policy and procedures.
   • Production of X-rays and gamma rays is explained in relation to radiographic testing activities.
   • Attenuation factors of ionizing radiation and the biological effects on living tissue are outlined.
   • The biological effects of radiation are identified.
2. Apply radiation safety procedures/plans
   • Appropriate ionizing radiation protective measures are employed in accordance with relevant organisational policy and procedures.
   • SI units of radiation are explained as per the National Health and Medical Research Council/ statutory requirements.
   • Exposure limits for personnel as laid down by the radiation authorities in Australia are stated and adhered to.
   • Minimum exposure rates/distances are determined from calculations and charts.
   • Ionizing radiation sources are operated in accordance with legislation, standards and/or organisational policy, procedures or guidelines.
3. Select and use radiation monitoring equipment
   • The tools and equipment necessary to monitor radiation are selected and used as required.
   • Techniques and system verification checks necessary to monitor radiation are selected and applied.
   • Safety breaches are documented and/or reported in accordance with organisational policy and procedures.
4. Respond to emergency situations
   • Procedures for dealing with both X-ray and gamma ray emergency situations are demonstrated.

Required Skills

Required skills

Look for evidence that confirms skills in calculating and numerical operations within the scope of this unit reading and interpreting charts written job instructions specifications standard operating procedures lists drawings and other applicable reference documents planning and sequencing operations checking and clarifying taskrelated operations checking for conformance to specifications using monitoring equipment calculating and monitoring radiation handling emergencies following safety requirements assessing risk

Required knowledge

Look for evidence that confirms knowledge of properties of Xrays and gamma rays and principal radioactive sources used in industrial radiography attenuation factors known biological effects of radiation general principles of gas ionisation photographic effect luminescence use of film film badges ionisation chamber devices quartz fibre fluorescent electronic devices accuracy limits energyrange different SI units of radiation including becquerel sievert and gray exposure limits for personnel as laid down by the radiation authorities in Australia the three exposure reduction factors including time distance and shielding procedures for establishing safe working barriers relevant techniques and checks emergency procedures safety procedures including for types of Xray equipment types of isotope cameras shielding materials design and requirements for exposure areas requirements for storage of radioisotopes emergency situations causes and appropriate responses hazards and control measures associated with ionizing radiation including housekeeping storage requirements of equipment and materials use and application of personal protective equipment safe workplace practices and procedures legal requirements including AustralianNSW regulations code of practice detail ICRP recommended limits for various persons and various parts of the body for shortterm longterm and accumulated exposure background radiation duties of RSO requirements for transport IATA regulations obligations of the licensee

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to safely work with ionizing radiation when performing radiographic testing
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria including required knowledge and be capable of applying the competency in new and different situations and contexts
Context of and specific resources for assessment	This unit may be assessed on the job off the job or a combination of both on and off the job Where assessment occurs off the job that is the candidate is not in productive work then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team The assessment environment should not disadvantage the candidate This unit could be assessed in conjunction with any other units addressing the safety quality communication materials handling recording and reporting associated with radiographic testing or other units requiring the exercise of the skills and knowledge covered by this unit
Method of assessment	Assessors should gather a range of evidence that is valid sufficient current and authentic Evidence can be gathered through a variety of ways including direct observation supervisors reports project work samples and questioning Questioning techniques should not require language literacy and numeracy skills beyond those required in this unit of competency The candidate must have access to all tools equipment materials and documentation required The candidate must be permitted to refer to any relevant workplace procedures product and manufacturing specifications codes standards manuals and reference materials
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Relevant organisational policy and procedures	Legislation Standard operating procedures (SOPs) Australian or international standards Risk assessments Previous testing reports Manufacturer specifications
Production of X-rays and gamma rays	Atomic structure, protons, neutrons, electrons, atomic number, mass number, isotopes Electromagnetic radiation wavelength, frequency, energy relationships, intensity Construction and operation of X-ray tube anode, cathode, target Gas and coolidge tubes Glass and ceramic tubes X-ray spectrum Characteristic and continuous spectra effect of voltage and current on continuous spectra Efficiency Natural and artificial radioisotopes Production of radioisotopes Decay mechanisms, alpha, beta-, beta+, and gamma Concept of half life, decay constants Selection of gamma ray sources Units definition of curie, becquerel, conversion of units, multiple units (e.g. GBq), nuclide chart
Biological effects of radiation	Ionisation, absorption, scatter (Compton, Rayleigh, photo-electric, pair production) Attenuation coefficient, absorption edges Units roentgen, rad, coulomb/kg, gray conversions Effects of varying doses on living tissue Somatic effects, genetic effects, cell biology nucleus, cytoplasm DNA, chromosome, mitosis; symptoms, effect of time, ICRP recommendations Dose, dose equivalent, RBE, rem, seivert, conversions Occupancy factor
Protective measures	Personal protective equipment (PPE) including for risks other than ionizing radiation Safety protocols of workplace (e.g. flame limitations in refineries) Signage, barriers/guards Limitations on operation of specific equipment/machines
Minimum exposure	Time, distance, shielding effect of distance, inverse square law Half and tenth value layers Emergency procedures, company procedure codes

---