Elements and Performance Criteria
- Disconnect equipment
- Determine electrical characteristics of equipment and circuit by reference to circuit drawings, schematics, reference manuals, equipment specifications, identification plate and/or consultation with technical adviser
- Determine and record equipment characteristics, including direction of rotation, where appropriate
- Identify point/s of electrical isolation and isolate equipment in accordance with procedures
- Use all lock-off equipment and signage requirements appropriately
- Prove electrical isolation using appropriate techniques, procedures and test equipment
- Note, record and label conductor layout
- Disconnect conductors and terminate and make safe disconnected cables/connections
- Connect equipment
- Identify characteristics of the equipment to be connected and determine connection requirements
- Check circuit for safe isolation using appropriate test equipment, procedures and techniques
- Check connections and prepare conductors for termination
- Connect conductors to equipment in accordance with specifications and regulatory requirements
- Fasten/seal all cables/wires/conduit to specifications
- Remove all lock-off equipment and signage
- Check and test equipment and circuit for compliance with specifications and regulatory and legislative requirements
- Determine job requirements
- Comply with work health and safety (WHS) requirements at all times
- Use appropriate personal protective equipment (PPE) in accordance with SOPs
- Identify job requirements from specifications, drawings, job sheets or work instructions
- Determine and record equipment characteristics, including direction of rotation, where appropriate
- Identify point/s of electrical isolation and isolate equipment in accordance with procedures
- Use all lock-off equipment and signage requirements appropriately
- Prove electrical isolation using appropriate techniques, procedures and test equipment
- Note, record and label conductor layout
- Disconnect conductors and terminate and make safe disconnected cables/connections
- Check circuit for safe isolation using appropriate test equipment, procedures and techniques
- Check connections and prepare conductors for termination
- Connect conductors to equipment in accordance with specifications and regulatory requirements
- Fasten/seal all cables/wires/conduit to specifications
- Remove all lock-off equipment and signage
- Check and test equipment and circuit for compliance with specifications and regulatory and legislative requirements
- Perform emergency first aid
- Undertake rescue/recovery of injured person or provide assistance to injured person in accordance with recognised standards/procedures
- Make contact with the appropriate medical and rescue authorities
- Record details of first aid given