Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Adjust timing of precision micro-mechanisms
   • Data for precision timing of micro-mechanisms is analysed and interpreted.
   • Compensation/adjustment is made to achieve a constant rate.
2. Diagnose precision micro-mechanisms
   • Detailed inspection techniques are applied to diagnose and identify performance faults, condition and repair/servicing requirements.
   • High tolerance/precision tools and equipment are handled and used correctly.
3. Carry out precision micro-mechanism servicing
   • Precision components are replaced as appropriate.
   • Components are adjusted to precision tolerances and specifications.
4. Repair and adjust chronograph mechanisms
   • Functional elements are adjusted and tested.
   • Chronograph components are examined and re-finished as required.

Required Skills

Required skills

Look for evidence that confirms skills in eliminatingminimising effects of internal externalexternal influences judging adequacy of accuracy making timing adjustments include balance spring dynamic poising static poising truing balance flat and round making detailed observations using highmagnification optics testing functioning of components to high tolerances including the functioning of escapement and oscillating system removing and replacing assembly and subassembly components including balance staff pallet staff pallet jewels and other precision components adjusting pallet jewels safety action of escapement poise of balance manipulation of balance spring to minimise error in performance tensioning chronograph wheel and minute wheel observing and adjusting depth of engagement and operating sequence of functioning elements applying lubrication alignment of hands with dial refinishing and matching components to existing components to ensure correct functioning fitting and adjusting new and repaired components to function within existing system

Required knowledge

Look for evidence that confirms knowledge of physical limitations and condition of system and control factors influencing isochronism inherent influences in design internal and external influences on rating variation adjustment procedurestechniques detailed inspection and analysis techniques for diagnosing precision micromechanisms acceptable tolerances clearances and limits for precision components components suitable for precision outcomes effects of adjustment on performance and operation criteria for correct adjustment of balance spring and regulating system types of chronograph mechanisms and their functioning adjustment procedures for chronograph operation including minute and hour recording systems

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to perform precision micromechanism diagnosis and servicing Competency in this unit cannot be claimed until all prerequisites have been satisfied
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria including required knowledge and be capable of applying the competency in new and different situations and contexts
Context of and specific resources for assessment	This unit may be assessed on the job off the job or a combination of both on and off the job Where assessment occurs off the job that is the candidate is not in productive work then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team The assessment environment should not disadvantage the candidate This unit could be assessed in conjunction with any other units addressing the safety quality communication materials handling recording and reporting associated with preparing precision micromechanism diagnosis and servicing or other units requiring the exercise of the skills and knowledge covered by this unit
Method of assessment	Assessors should gather a range of evidence that is valid sufficient current and authentic Evidence can be gathered through a variety of ways including direct observation supervisors reports project work samples and questioning Questioning should not require language literacy and numeracy skills beyond those required in this unit The candidate must have access to all tools equipment materials and documentation required The candidate must be permitted to refer to any relevant workplace procedures product and manufacturing specifications codes standards manuals and reference materials
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Micro-mechanisms	Mechanical and electric precision watches and clocks of recent manufacture, or restoration pieces. Includes chronometer timepieces. May include day/date, automatic winding or generating systems. Clock mechanisms may include alarm, striking and chiming mechanisms
Repair/servicing requirements	Repairs and timing adjustments include balance spring, dynamic poising, static poising, truing balance (flat and round) Repair and adjustment of chronograph mechanisms to ensure correct operation of seconds, minute and hour recording systems
Tools and equipment	Range of precision mechanical/electronic tools and high-tolerance testing equipment for detailed observation diagnosis and servicing. Includes specialist service tools for adjusting oscillating systems and chronograph mechanisms
Precision components	Timekeeping elements, including balance staff, pallet staff, pallet jewels, wheel trains and other precision components Power source, mechanical oscillating systems, motion work, calendar systems
Specifications	Precision adjustment performed to detailed manufacturer specifications and tolerances Account made of inherent influences in design, internal and external influences on rating variation
Tests	Observations of high-tolerance clearances, fits and adjustments and functioning Operation of systems and performance analysis

---