Elements and Performance Criteria
- Prepare for the work
- Applicable work health and safety (WHS), legislative and organisational requirements relevant to coarse sanding of timber flooring are verified and complied with
- Instructions and/or plans are read and interpreted to identify process required to complete work tasks
- Timber flooring is checked for contamination and moisture content
- Timber flooring condition is assessed and the extent of floor preparation required to meet job specifications is confirmed
- Timber flooring is inspected for suitability for sanding operations and any pre-sanding tasks are completed
- Mechanical fixings are removed avoiding damage to equipment and surfaces
- Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
- Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation
- Conduct coarse sanding operations
- Coarse sanding equipment is set up in accordance with manufacturer instructions and operating procedures
- Emergency stops, gauges, guards and controls are identified and checked
- Equipment settings and adjustments are made and checked
- Trial runs are conducted to check machine operations and quality of finished work
- Sanding belts or papers are attached, routinely checked and changed as required
- Sanding is completed systematically and effectively within the minimum required timeframe
- Routine lubrication and adjustments to the equipment are completed as required
- Timber flooring is cleared and checked for further processing
- Conduct edge sanding operations
- Edge sanding equipment is set up in accordance with manufacturer instructions and operating procedures
- Emergency stops, gauges, guards and controls are identified and checked
- Equipment settings and adjustments are made and checked
- Sanding papers are selected
- Trial runs are conducted to check machine operations and quality of finished work
- Sanding papers are attached, routinely checked and changed as required
- Edge sanding is completed systematically and effectively within the minimum required timeframe
- Routine lubrication and adjustments to the equipment are completed as required
- Finished timber flooring is cleaned, inspected and any imperfections are rectified following workplace procedures
- Complete housekeeping