Google Links
Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge
Elements and Performance Criteria
- Prepare for the work
- Prepare the substrate
- Set out work area
- Prepare trowel-applied system
- Apply trowel-applied system
- Complete housekeeping
- Check, clean and store tools and equipment in accordance with workplace procedures
- Seal and store unused coating materials in accordance with supplier instructions
- Clean work area and dispose of rubbish safely
- Accurately complete required workplace documentation
- Identify and follow work health and safety, legislative, and organisational requirements
- Correctly interpret work orders and confirm job requirements
- Select and check tools and equipment for suitability, serviceability and safety prior to use
- Plan application with respect to specified film thickness and/or consumption, cutting in, boundaries, seams, joints and exit points
- Inspect condition of the mechanically prepared subfloor and confirm suitability for required finish consistent with supplier recommendations
- Remove dust and debris from the substrate prior to application, and control sources
- Establish mixing area in suitable area and select surface protection measures and apply to areas not being coated
- Check coating materials for correct quantities, undamaged packaging and no obvious discrepancies in colour and viscosity
- Select suitable masking tape and correctly apply to mark off edges, transitions and other floor boundaries