Elements and Performance Criteria
- Identify work requirements
- Prepare for work
- Take accurate site measurements and establish clearance and wedge requirements
- Select glass and frames, and check for type, size and imperfections against job requirements
- Select glass type and fixing method in accordance with Australian Standards and advise customer if requirements impact on glass ordered
- Select and check tools and equipment for suitability, serviceability and safety prior to use
- Prepare fixing and sealing materials by mixing or cutting to length, in accordance with job requirements
- Identify site conditions and constraints
- Recognise on-site hazards and constraints and take corrective action in accordance with regulations and workplace requirements
- Apply covering material to protect existing fixtures and fittings in accordance with workplace procedures
- Identify characteristics of the window or door which may affect the finished job and take corrective action
- Perform glazing
- Safely remove and dispose of glass from existing frame in accordance with workplace procedures
- Prepare frame to receive glass through check of size against specifications, removal of sealant remains, and surface preparation
- Cut glass to size in accordance with work requirements
- Fix glass to the frame using the selected method and in accordance with established industry procedures and Australian Standards
- Use solvents and sealants in accordance with manufacturer recommendations and Australian Standards
- Remove excess sealing material and clean glass and frame with suitable cleaning agents after fixing
- Complete work
- Check completed installation for compliance with specifications and rectify any deficiencies
- Clean and store tools, equipment and materials in accordance with workplace procedures
- Clean work area and leave in a safe condition, and dispose of or recycle waste in accordance with workplace protocols
- Accurately complete required workplace documentation