Elements and Performance Criteria
- Identify work requirements
- Prepare for installation
- Identify site conditions and constraints
- Consult customer and obtain permission prior to site inspection
- Identify site safety hazards and take corrective action to reduce injury to self and others
- Identify other on-site characteristics for their impact on the installation process
- Take accurate measurements and confirm against job specification
- Apply covering material to protect existing fixtures and fittings in accordance with workplace procedures
- Prepare frame/opening and materials
- Remove glass in accordance with safety and work requirements
- Assess frame and/or opening to ensure suitability for re-glazing in accordance with customer requirements and Australian Standards
- Report defective frames for repair or replacement in accordance with workplace procedures
- Prepare frame and/or opening to receive glass through check of size against specifications, removal of sealant remains and surface preparation
- Prepare fixing and sealing materials by mixing or cutting to length in accordance with job requirements
- Fix glass to the frame using the selected method and in accordance with recognised industry procedures and Australian Standards
- Use solvents and sealants in accordance with manufacturer recommendations and Australian Standards
- Remove excess sealing material and clean glass and frame after fixing
- Complete work
- Check completed installation for compliance with customer requirements, specifications and Australian Standards
- Clean and store tools, equipment and materials in accordance with workplace procedures
- Clean work area, leave in a safe condition and dispose of waste or recycle in accordance with workplace protocols
- Accurately complete required workplace documentation