Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Identify work requirements
   • Identify work requirements for the type of glass to be used and the method of fixing from work documentation and communication with the customer
   • Identify and follow work health and safety requirements for commercial reglazing
   • Plan a logical work sequence suited to the job and workplace procedures
2. Prepare for work
   • Take accurate site measurements and establish clearance and wedge requirements
   • Select glass and frames to match job requirements and check for type, size and imperfections against job requirements and relevant Australian Standards
   • Select glass fixing method to meet specifications
   • Select and check tools and equipment for suitability, serviceability and safety prior to use
3. Identify site conditions and constraints
   • Consult customer and obtain permission prior to site inspection
   • Identify site safety hazards and take corrective action to reduce injury to self and others
   • Identify other on-site characteristics for their impact on the installation process
   • Take accurate site measurements and confirm against job specification
   • Protect existing fixtures and fittings through the application of suitable coverings
4. Prepare frame and materials
   • Remove glass in accordance with safety requirements
   • Assess frame condition to ensure suitability for reglazing in accordance with Australian Standards
   • Report defective frames for repair or replacement in accordance with workplace procedures
   • Prepare frame to receive glass in accordance with specifications
   • Prepare fixing and sealing materials by mixing or cutting to length, in accordance with job requirements
5. Cut and fit glass
   • Safely cut glass using appropriate equipment in accordance with specific job requirements
   • Fix glass to the frame using the selected method in accordance with workplace procedures and Australian Standards
   • Use solvents and sealants in accordance with manufacturer recommendations and Australian Standards
   • Remove excess sealing material and clean glass and frame with suitable cleaning agents after fixing
6. Complete work
   • Check completed installation for compliance with customer requirements, specifications and Australian Standards
   • Clean and store tools, equipment and materials in accordance with workplace procedures
   • Clean work area and leave in a safe condition and dispose of waste or recycle in accordance with workplace protocols
   • Accurately complete required workplace documentation