Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Unload samples
   • Unload samples sequentially in accordance with workplace procedures
   • Obtain analytical portions of each sample using workplace procedures
   • Label and store analytical portions and excess sample material in accordance with workplace procedures
   • Seek advice when problems are beyond scope of responsibility or knowledge
2. Prepare robotic system for operation
   • Perform routine system checks at start of shift
3. Confirm shift priorities with supervisor
4. Review job requests to identify the samples, required parameters and special instructions/preparation methods for each
5. Identify hazards, safety equipment and safe work procedures associated with samples, preparation methods and robotic system
6. Check that samples are dry and free of obvious contamination
7. Check that the particle size of any sample does not exceed system input size limits
8. Check samples against accompanying documentation and record/report any discrepancies
9. Load samples into system
   • Scan sample barcodes into system
10. Load samples in the correct sequence when the system is ready
11. Use system monitor to ensure that correct worksheet is assigned to each sample
12. Monitor system and report errors
    • Monitor screen displays and conduct visual checks, as necessary, to ensure that system operates correctly throughout cycle
13. Recognise common error codes and promptly inform supervisor
14. Seek advice to deal with any situation beyond scope of responsibility or knowledge
    • Unload samples sequentially in accordance with workplace procedures
15. Obtain analytical portions of each sample using workplace procedures
16. Label and store analytical portions and excess sample material in accordance with workplace procedures
17. Seek advice when problems are beyond scope of responsibility or knowledge
18. Maintain a safe work environment
    • Use safe work practices and personal protective equipment (PPE) to ensure personal safety and that of others
19. Minimise the generation of waste and environmental impacts
20. Segregate and dispose of wastes in accordance with workplace requirements
21. Clean robotic system components, care for and store equipment as required