Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare automated analysis system for operation
   • Confirm equipment status, shift priorities, work flow issues and/or specific client requirements with supervisor and other operators
2. Plan or adjust work flow to suit maintenance or servicing as required
3. Review job requests to identify samples/batches, required operating parameters and any special instructions/analyses for each
4. Identify hazards, safety equipment and safe work procedures associated with samples, reagents, analytical methods and operating robotic arms
5. Perform routine system checks at start of shift
6. Conduct or monitor loading of samples into system
   • For systems with a manual in-feed station, prepare vials with the specified sample volume and load them in the correct sequence
7. For fully automated systems, monitor sample in-feed station to ensure vials contain specified minimum volumes
8. Monitor and adjust system operation
   • Adjust system operating parameters, such as furnace temperature, to suit specific batch requirements
9. Monitor control screens continuously and respond promptly to error codes
10. Seek advice about dealing with any situation beyond scope of responsibility or knowledge
11. Liaise with and assist relevant service personnel to ensure major breakdowns are rectified promptly
12. Maintain a safe work environment
    • Use safe work practices, safety equipment and personal protective equipment (PPE) to ensure personal safety and that of others
13. Minimise the generation of waste and environmental impacts
14. Segregate and dispose of wastes in accordance with workplace requirements