Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Test samples
   • Position and secure test specimen in test equipment/instrument
   • Conduct preliminary measurements to determine optimum test conditions and instrument settings
   • Perform each measurement stage in sequence, terminating each stage at the appropriate end point
   • Record all test measurements, observations and factors that may impact on quality of results
   • Remove test piece and conduct post-test measurements
   • Shut down equipment and store used test pieces in accordance with workplace procedures
2. Interpret and schedule test requirements
   • Review test request and sample documentation to identify required test parameters and intended use of bulk material
3. Identify hazards and workplace control measures associated with the sample, preparation/testing methods and equipment
4. Inspect samples, compare with specifications, record and report discrepancies
5. Liaise with client when samples and/or request forms do not comply with workplace procedures
6. Match required parameters with suitable test methods, available equipment and instrument specifications
7. Plan parallel work sequences to optimise throughput of multiple sets of samples
8. Prepare and measure test specimens
   • Prepare test specimens in accordance with test method
9. Conduct preliminary measurements to establish initial dimensions and conditions
10. Store test specimens and residual sample materials to maintain their integrity
11. Check equipment before use
    • Set up equipment/instruments in accordance with test method
12. Perform pre-use and safety checks in accordance with workplace procedures and manufacturer specifications
13. Identify faulty or unsafe components and equipment and report to appropriate personnel
14. Check calibration status of equipment and quarantine out-of-calibration or faulty items
15. Clean, care for and store equipment and consumables in accordance with workplace procedures
    • Position and secure test specimen in test equipment/instrument
16. Conduct preliminary measurements to determine optimum test conditions and instrument settings
17. Perform each measurement stage in sequence, terminating each stage at the appropriate end point
18. Record all test measurements, observations and factors that may impact on quality of results
19. Remove test piece and conduct post-test measurements
20. Shut down equipment and store used test pieces in accordance with workplace procedures
21. Process and analyse data
    • Confirm data is the result of valid measurements
22. Perform required calculations and ensure results are consistent with estimations and expectations
23. Record results with the appropriate accuracy, precision and units
24. Estimate and document uncertainty of measurement in accordance with workplace procedures, if required
25. Analyse trends in data and/or results and report out-of-specification or atypical results promptly to appropriate personnel
26. Troubleshoot procedure or equipment problems which have led to atypical data or results
27. Maintain laboratory records
    • Make entries on report forms or into a laboratory information management system accurately calculating, recording or transcribing data as required
28. Ensure traceability of sample from receipt to reporting of results