Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare the equipment for production
   • Conduct equipment pre-start procedures and visual checks
   • Set up and configure equipment start-up function in accordance with procedures and/or work instructions
   • Ensure appropriate pre-setting period has been observed
   • Load mould containing green concrete product onto transfer car and move to steam chamber
   • Cover mould as specified
   • Close and secure the steam chamber
2. Operate and monitor equipment
   • Start up, operate and monitor equipment in accordance with established enterprise procedures and manufacturer specifications
   • Monitor operating pressures and temperatures
   • Ensure the rate at which the concrete temperature increases is even, and that it doesn't exceed maximum temperature specified
   • Adjust and control equipment to ensure correct product quality
   • Complete appropriate records and logs
3. Shut down equipment
   • Shut down steam and depressurise chamber
   • Allow product to cool gradually and evenly
   • Open the chamber and discharge cured product
   • Complete appropriate records and logs
   • Ensure transfer cars are clear of all product and left ready for reuse
4. Prepare equipment for maintenance
   • Isolate equipment
   • Remove any broken materials safely
   • Make sure area is clear and safe for maintenance
5. Rectify routine problems
   • Identify and rectify faults and equipment failure
   • Maintain records and log books of equipment operations
   • Identify non-routine problems and report to designated person
6. Control hazards
   • Identify hazards in the curing area
   • Assess the risks arising from those hazards
   • Implement measures to control those risks
   • Shut down equipment in an emergency