Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Assemble and prepare the mould or former
   • Establish and maintain a safe working environment according to procedures
   • Identify and prepare appropriate mould or former
   • Level and secure the mould or former
   • Check that the base is stabilised and correctly mounted as required to facilitate rolling or turning out
   • Position inserts or loose pieces
   • Apply the correct stripping agent
2. Mould materials
   • Prepare the material mix or obtain the material from the batch preparation unit according to specifications
   • Provide an adequate supply of material to meet production requirements
   • Introduce material to the work piece cavity and compact according to procedures
   • Check inserts or loose pieces and secure to avoid movement during moulding
   • Roll and strip or turn out the component for finishing
3. Finish the component or product
   • Repair defects occurring during the moulding process
   • Remove inserts or loose pieces and replace in mould or former
   • Prepare the surface of the component for the application of any surface finishes
   • Cure or dry the components to specification
   • Return mould and/or segments for re-use or storage
4. Inspect and store components
   • Inspect component for defects
   • Store the component to specifications and procedures
5. Rectify routine problems
   • Identify and rectify faults and equipment failure
   • Maintain records and log books of equipment operations
   • Identify non-routine problems and report to designated person
6. Identify hazards
   • Identify hand moulding hazards
   • Implement hazard controls according to procedures
   • Report safety concerns according to procedures