Elements and Performance Criteria
- Prepare for winch-exit operations
- Appropriate clothing and equipment is selected and worn
- Winch-exit operations are undertaken in accordance with the organisation's safe work practices and aircraft capabilities
- Pre-flight aircraft safety and winch briefings are obtained and are acted upon
- The necessary firefighting equipment, as advised from workplace instructions, is assembled
- The aircraft is loaded in accordance with workplace instructions
- Seatbelts are secured in accordance with workplace instructions
- Winch-exit from helicopter
- Winching equipment is donned and attached to winch cable
- Seatbelts are unsecured following clearance to commence movement within the helicopter
- Movement towards the helicopter door and assumption of the winching position is undertaken in accordance with workplace instructions
- Actions are undertaken to minimise uncommanded movement, spinning, or swaying during descent to the ground
- Correct landing techniques are selected and used in consideration of ground and weather conditions
- Winch equipment is detached, all clear signal communicated and the assembly point for individual and equipment is identified and reached in accordance with the organisation's procedures
- Winch on board helicopter
- Individuals and equipment are located at the nominated assembly point, winching equipment is donned and attached to winch cable and all clear signal is communicated to the crew person in accordance with the organisation's procedures
- Actions to minimise uncommanded movement, spinning or swaying during ascent to the helicopter are undertaken in accordance with the organisation's procedures
- Movement on board the helicopter and towards the seat is undertaken in accordance with workplace instructions
- Seatbelts are secured and remain so until the helicopter has landed and clearance is obtained to commence movement within the helicopter