Elements and Performance Criteria
- Plan and prepare for site rehabilitation
- Access, interpret and apply exploration site rehabilitation documentation and ensure the work activity is compliant
- Access, read, interpret and apply the rehabilitation plan and Environmental Work Procedures (EWP)
- Identify, address and report potential hazards and risks
- Select and wear personal protective equipment appropriate for the work activity
- Obtain map of area and identify location of sites to be rehabilitated
- Establish communication system and protocols
- Carry out rehabilitation plant and equipment pre-start checks
- Rehabilitate exploration site
- Assess and address hydrocarbon spills at drill site
- Ensure saline or contaminated water sumps are completely dry
- Identify and address waste materials according to rehabilitation plan and Environmental Work Procedures (EWP)
- Operate plant and machinery to scarify all cleared areas
- Retrieve cleared vegetation and return to rehabilitated site
- Remove and dispose of all rubbish
- Re-vegetate area, if required
- Record rehabilitation details
- Inspect rehabilitated site for compliance
- Cap drill holes
- Excavate hole collar to suitable depth
- Pour excess drill chips into drill hole
- Select and insert hole plug firmly into hole opening/collar, and ensure water ingress and future erosion is prevented
- Backfill excavated soil onto plug and compact firmly, allowing for subsidence and run off
- Peg hole site and mark with ID number
- Rehabilitate access tracks
- Plan and prepare for site rehabilitation
- Access, interpret and apply exploration site rehabilitation documentation and ensure the work activity is compliant
- Access, read, interpret and apply the rehabilitation plan and Environmental Work Procedures (EWP)
- Identify, address and report potential hazards and risks
- Select and wear personal protective equipment appropriate for the work activity
- Obtain map of area and identify location of sites to be rehabilitated
- Establish communication system and protocols
- Carry out rehabilitation plant and equipment pre-start checks
- Rehabilitate exploration site
- Assess and address hydrocarbon spills at drill site
- Ensure saline or contaminated water sumps are completely dry
- Identify and address waste materials according to rehabilitation plan and Environmental Work Procedures (EWP)
- Operate plant and machinery to scarify all cleared areas
- Retrieve cleared vegetation and return to rehabilitated site
- Remove and dispose of all rubbish
- Re-vegetate area, if required
- Record rehabilitation details
- Inspect rehabilitated site for compliance
- Cap drill holes
- Excavate hole collar to suitable depth
- Pour excess drill chips into drill hole
- Select and insert hole plug firmly into hole opening/collar, and ensure water ingress and future erosion is prevented
- Backfill excavated soil onto plug and compact firmly, allowing for subsidence and run off
- Peg hole site and mark with ID number
- Rehabilitate access tracks