RANGE STATEMENT |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. |
Ballasted track geometry to be checked and repaired may include: | plain trackturnouts and special track work |
Track geometry repair methods may include: | manual fettling with hand tools and light equipmentmanual fettling with small on-track or off-track plant (spot tampers, etc.)resurfacing with large on-track plant |
Manual fettling includes: | any operation where measurement of geometry (before and after) is conducted by hand-held equipment and lifts and pulls are manually calculated |
Resurfacing operations include: | any operation where measurements and calculations of lifts and pulls are carried out automatically or semi-automatically by resurfacing plant |
Equipment may include: | mechanical lifting and handling devicesbasic hand tools and small planttrack jackson-track machines, such as tampers, liners or regulatorsmanual and electronic measuring equipment |
Certifying track after work includes: | confirming safe clearances of any structure erected adjacent to or over the track |
Reinstatement of service may include: | unrestricted operation of rail trafficoperation under speed restrictionrestricted clearance operationoperation under tonnage restrictions |
Liaison may include: | internal or external personnel from other work areas |
Communication equipment systems may include: | two-way radiostelephones, including mobile phonesagreed audible or hand signals |
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include: | company proceduresenterprise proceduresorganisational proceduresestablished procedures |
Safety and personal protective equipment may include: | high visibility clothinghearing protectionglovessunscreensunglassesdust masksafety glassesinsect repellentsafety headwearsafety footwearportable radios and mobile phoneshand lampsflagssafety devices |
Information and documents may include: | maintenance notices, records and requestslocal instructionslocal authority regulations and procedureswork orderstechnical instructionsmanufacturer or workplace equipment operation manualsoperational instructions, policies and workplace procedurestwo-way radio or mobile telephone operation proceduresemergency procedures manualquality assurance (QA) plans, data and document controlconditions of service, legislation and industrial agreements, including workplace agreements and awards |
Applicable regulations and legislation may include: | legislated rail safety requirements, including acts and regulations from each applicable state or territory, together with any nationally approved compliance codes and guidelinesrelevant state or territory regulations, codes of practice and safeworking system requirementsrelevant Australian standards (AS) and related requirements, including AS 4292relevant state or territory legislation relating to:environmental protectionOH&S |