Elements and Performance Criteria
- Prepare to find and repair faults
- WHS/OHS risk control measures and workplace procedures are followed in preparation for the work
- Scope of measuring and analysis systems fault is obtained from documentation and/or work supervisor
- Advice is sought from the work supervisor to ensure work is coordinated effectively with others
- Sources of materials required for work are determined in accordance with workplace procedures
- Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
- Find and repair faults
- Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
- Apparatus is inspected and isolated in accordance with WHS/OHS requirements and workplace procedures
- Fault finding of measuring and analytical equipment and circuit is conducted using measured and calculated values of apparatus parameters in accordance with workplace procedures
- Equipment components are dismantled, as required, and parts stored to protect against loss or damage in accordance with workplace procedures and relevant industry standards
- Faulty components are rechecked and fault status confirmed
- Faulty components are readjusted or replaced in accordance with workplace procedures
- Repaired components are tested in accordance with workplace procedures
- Apparatus is reassembled, inspected, tested and prepared for return to service
- Unplanned situations are dealt with safely and with the approval of relevant person/s
- Fault-finding and repair activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
- Complete and report fault-finding and repair activities
- Work area is cleaned and made safe in accordance with workplace procedures
- Written justification is made for repairs to apparatus, components and materials in accordance with workplace procedures
- Acceptance that the reported fault/s have been repaired is sought from relevant person/s in accordance with workplace procedures