Elements and Performance Criteria
- Prepare to assemble and enter operating instructions.
- OHS procedures for a given work area are identified, obtained and understood through established routines and procedures.
- Established OHS risk control measures and procedures are followed in preparation for the work.
- Safety hazards that have not previously been identified are reported and advice on risk control measures is sought from the work supervisor.
- Work supervisor or customers are consulted to determine which functions of the device are to be use and the parameter of each
- Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
- Device installation is checked for compliance with job specification and regulations where they apply.
- Assemble and enter operating instructions.
- Established OHS risk control measures and procedures for carrying out the work are followed.
- Circuits/machines/plant are checked as being isolated where necessary in strict accordance OHS requirements and procedures.
- The required status of each function of the device is entered and their parameters set in accordance with manufacturer programming instructions.
- Entered data are checked as meeting those specified by the work supervisor or customer.
- Procedures for referring non-routine events to immediate supervisor for directions are followed.
- Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety.
- Test device operation and report.
- Device operation is tested in strict accordance OHS requirements and procedures.
- Operating anomalies are identified and corrected in accordance with established routines.
- OHS work completion risk control measures and procedures are followed.
- Work site is cleaned and made safe in accordance with established procedures.
- Work completion is reported and appropriate person(s) notified in accordance with established routines.