Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed, and appropriate personnel notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Occupational Health and Safety (OHS)/Work, Health and Safety (WHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with the work procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace
8. Potential hazards are identified, and risk control measures, are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Fabricate and install pipe work
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
11. Pipe runs are identified, calculations performed and sketches made of planned installation in accordance with workplace procedures
12. Pipe work is fabricated, using appropriate techniques and equipment, in accordance with workplace procedures
13. Pipe work is levelled and aligned, and installed or coupled, in accordance with the workplace procedures
14. Maintain industrial pipework
    • Pipe work found to be faulty is repaired and replaced to conform to site requirements or manufacturers' specifications, in accordance with workplace procedures
15. Pipe work modifications and alterations are undertaken, in accordance with workplace procedures, site requirements and manufacturers' specifications
16. Machinery and/or plant is returned to service, and pipe work is monitored and adjusted, in accordance with workplace procedures
    • Work is completed, and appropriate personnel notified, in accordance with workplace procedures
17. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
18. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
19. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---