Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources for work activities are obtained and inspected for compliance with the job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with the work procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove mechanicalvalves for maintenance
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
11. Mechanical valve is disconnected, in accordance with workplace procedures
12. Mechanical valve is removed, in a manner which will assist in replacement, in accordance with the workplace procedures
13. Mechanical valve is inspected for abnormalities, in accordance with the workplace procedures
14. Perform mechanicalvalve maintenance
    • Maintenance is performed, in accordance with manufacturers' specification and workplace procedures
15. Mechanical valve is dismantled, clearly marked for identification, and relevant sketches are drawn, in accordance with workplace procedures
16. Components are prepared for reassembly, in accordance with manufacturers' drawings and/or manuals and workplace procedures
17. New components are inspected, in accordance with workplace procedures, to ensure compliance with manufacturers' specification
18. Dimensional inspection is performed with precision measuring devices, in accordance with workplace procedures, to ensure compliance with manufacturers' specification and
19. Components are reassembled for testing, in accordance with manufacturers' specification and workplace procedures
20. Modifications and/or alterations are undertaken, in accordance with manufacturers' specification and workplace procedures
21. Components are levelled, aligned, coupled and connected, in accordance with manufacturers' specifications and workplace procedures
22. Valves are pressure tested, monitored and adjusted, if required, in accordance with manufacturers' specifications and workplace procedures
23. Replaceorinstall mechanicalvalves
    • Equipment is prepared for valve replacement, in accordance with workplace procedures
24. Mechanical valve is replaced, in accordance with manufacturers' specification and workplace procedures
25. Mechanical valve is connected, in accordance with manufacturers' specification and workplace procedures
26. Final inspection is completed, in accordance with workplace procedures
    • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
27. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
28. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
29. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---