Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove mechanical pumps for maintenance
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures and site requirements
11. Mechanical pump is disconnected, in accordance with the workplace procedures
12. Mechanical pump is removed, in a manner which will assist in replacement, in accordance with workplace procedures
13. Mechanical pump is inspected for abnormalities, in accordance with workplace procedures
14. Maintain mechanical pumps
    • Maintenance is performed, in accordance with manufacturers' specification and workplace procedures
15. Mechanical pump is dismantled, in accordance with manufacturers' specification and workplace procedures
16. Sketches are made, data is noted and components are marked for identification or reassembly, in accordance with workplace procedures
17. New components are inspected for compliance, in accordance with workplace procedures and manufacturers' specifications
18. Dimensional inspection is performed, with precision measuring devices, in accordance with workplace procedures, to ensure compliance with manufacturers' specifications and results are recorded
19. Mechanical pump is reassembled, applying appropriate principles and techniques, in accordance with workplace procedures and manufacturers' specifications
20. Modifications and/or alterations to mechanical pump are undertaken, in accordance with workplace procedures
21. Replaceor install mechanicalpumps
    • Equipment is prepared for pump replacement, in accordance with workplace procedures
22. Mechanical pump is replaced, in accordance with workplace procedures and manufacturers' specification
23. Mechanical pump is levelled, aligned, coupled and connected, in accordance with workplace procedures
24. All fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
25. Machinery and/or plant, including mechanical pump, are given a test run, and are monitored and adjusted, as required, in accordance with workplace procedures and manufacturers' specifications
    • Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
26. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
27. Tools and equipment are maintained and stored, in accordance with workplace procedures
28. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---