Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources for work activities are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove screens, strainers and filtersfor maintenance
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
11. Screens, strainers and filters are disconnected, in accordance with workplace procedures
12. Screens, strainers and filters are removed, in a manner which will assist in replacement, in accordance with workplace procedures
13. Screens, strainers and filters are inspected for abnormalities, in accordance with workplace procedures
14. Maintain screens, strainers and filters
    • Equipment isolation and depressurisation is confirmed visually and manually, as required, in accordance with workplace procedures
15. Plant and/or equipment including screen, strainer and filter components, assemblies and/or subassemblies, are identified and prepared for maintenance, in accordance with workplace procedures
16. Equipment, including screens, strainers and filters are removed, cleaned and marked for identification, in accordance with workplace procedures
17. Faulty items are repaired or overhauled, using appropriate principles, techniques and industry standards, in accordance with the workplace procedures
18. Replacement items for installation are selected and inspected, in accordance with manufacturers' specification and workplace procedures
19. Modifications or alterations outside of the manufacturers' specification are approved by appropriate personnel, in accordance with workplace procedures
20. Component failures are identified and probable causes are reported, in accordance with workplace procedures
21. Components or subassemblies are refitted, in accordance with workplace procedures and manufacturers' specification
22. All fastenings are torqued, in accordance with workplace procedures and manufacturers' specification
23. Replace screens, strainers and filters
    • Equipment and plant is prepared for screens, strainers and filter replacements, in accordance with workplace procedures
24. Screens, strainers and filters are replaced, in accordance with workplace procedures and manufacturers' specification
25. Screens, strainers and filters are levelled, aligned and coupled, in accordance with workplace procedures
26. Equipment and plant including screens, strainers and filters, are given a test run and are monitored and adjusted, as required, in accordance with workplace procedures and manufacturers' specification
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
27. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
28. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
29. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---