Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources for work activities are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Remove associatedequipment to facilitate maintenance
    • Faulty components and parts of conveyor system are identified and isolations are confirmed, where appropriate, in accordance with workplace procedures
11. Associated equipment of conveyor system is disconnected, in accordance with the workplace procedures
12. Associated equipment of conveyor system is removed, in a manner which will assist in replacement, in accordance with the workplace procedures
13. Conveyors and associated equipment are inspected for abnormalities, in accordance with workplace procedures
14. Maintain conveyors or associated equipment
    • Belt tensioning equipment is released and secured, to facilitate maintenance, in accordance with workplace procedures
15. Sketches are made, data is noted and components are marked for identification or reassembly, in accordance with manufacturers' specification and workplace procedures
16. Modifications or alterations outside of manufacturers' specification are approved, in accordance with workplace procedures
17. New components are installed, and inspected for compliance with job specification, and are prepared for reassembly, in accordance with workplace procedures
18. Dimensional inspection is performed, in accordance with workplace procedures, using precision measuring devices to determine compliance
19. Conveyors are levelled, aligned and tensioned, in accordance with workplace procedures and site requirements
20. Replaceorinstall conveyors or associated equipment
    • Faulty components and parts are identified, and site is prepared for conveyors and associated equipment to be replaced, in accordance with workplace procedures
21. Conveyors and associated equipment are replaced, in accordance with workplace procedures and manufacturers' specification
22. Conveyors and associated equipment are levelled, aligned and coupled, in accordance with workplace procedures
23. All fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
24. Conveyors and associated equipment are given a test run, monitored and adjusted, as required, in accordance with workplace procedures and manufacturers' specifications
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
25. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
26. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
27. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---