Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Complete work
   • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
   • Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
   • Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
   • Work completion details are finalised, in accordance with workplace procedures
2. Plan and prepare for work
   • Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
3. Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
4. Resources are obtained and inspected for compliance with job specification
5. Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures
6. Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
7. Work is planned, sequenced and prioritised, in accordance with workplace procedures
8. Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures
9. Work area is prepared, in accordance with workplace procedures
10. Conduct in-service testing
    • In-service tests are carried out, in accordance with workplace procedures
11. Faults are located using appropriate tools, equipment and testing techniques, in accordance with workplace procedures
12. Testing and fault finding results are analysed, in accordance with workplace procedures, to establish repairs required or serviceability of material feeder
13. Remove equipment to facilitate maintenance
    • Isolations are confirmed, where appropriate, in accordance with workplace procedures
14. Material feeders are disconnected, in accordance with the workplace procedures
15. Material feeders are removed, in a manner which will assist in replacement, in accordance with workplace procedures
16. Material feeders are inspected for abnormalities, in accordance with workplace procedures
17. Maintain material feeders
    • Maintenance is performed on material feeder, in accordance with workplace procedures and manufacturers' specification
18. Components or subassemblies are dismantled, cleaned and examined, in accordance with workplace procedures, to verify tolerances and to determine whether to replace, overhaul or repair
19. Material feeder equipment is dismantled, in a manner that will facilitate reassembly, in accordance with workplace procedures
20. Component parts are clearly marked for identification, in accordance with workplace procedures
21. Components are laid out, in preparation for reassembly, in accordance with workplace procedures and manufacturers' drawings or specifications
22. New components are inspected for compliance with manufacturers' specification and are prepared for assembly, in accordance with workplace procedures
23. Modifications or alterations are undertaken, in accordance with workplace procedures
24. Components are reassembled, in accordance with workplace procedures
25. Replaceorinstall material feeders
    • Equipment is prepared for material feeders to be replaced, in accordance with workplace procedures
26. All fastenings are torqued, in accordance with workplace procedures and manufacturers' specifications
27. Material feeders are given a test run and are monitored, as required, in accordance with workplace procedures and manufacturers' specification
    • Work is completed and appropriate personnel are notified, in accordance with workplace procedures
28. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
29. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
30. Work completion details are finalised, in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide.

---